555850
37
Zoom out
Zoom in
Previous page
1/46
Next page
37/46
Siemens Heating controllers RVP201 and RVP211 CE1P2464en
Building Technologies 6 Mechanical design 12.12.2007
6 Mechanical design
6.1 Controller
6.1.1 Basic design
The RVP201/211 is comprised of controller insert, which houses the electronics, the
power section, the output relays and all operating elements (on the controller front), and
the base, which carries the connection terminals. The operating elements are located
behind a transparent cover. At the rear of the cover, there is a slot where the operating
instructions can be inserted. The cover can be sealed.
The time switch is of plug-in design. The coding switches and setting potentiometers for
the plant-specific settings can be accessed after removal of the time switch.
If the controller is used without a time switch (RVP201.0 or RVP211.0), the space for
the time switch is covered up with a hinged cover. If a time switch is fitted at a later
time, the appropriate hole in the cover must be cut out with a knife.
The RVP201/211 can be fitted in three different ways:
Wall mounting
Rail mounting
Flush panel mounting; in that case, the front panel may have a maximum thickness
of 3 mm
To make certain the controller will be mounted the correct way, both base and casing of
the controller insert are marked "TOP".
First, the base is fitted and wired up. Then, the controller insert is secured to the base
by means of two screws. The fixing screw at the top can be sealed: screw the plug (to
be ordered as a separate item) into the threaded hole, insert a sealing wire through the
two lugs and seal it.
6.1.2 Dimensions
16,4
26 26 26 26
14.3
96
144
114,7
19,7
60,4
14
56
112
4,5
138
+1
0
92
+0,8
0
2464M01
144
max. 3
IEC 61554 - 144 × 96
35 ±0.3
EN 60715
max. 5
M16
EN 50262
22
max. 8
Dimensions in mm
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RVP201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RVP201 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RVP201

Siemens RVP201 Installation Guide - English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Finnish - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info