555868
11
Zoom out
Zoom in
Previous page
1/14
Next page
11 / 14
Siemens Operating Instructions RMH760B, RMK770 CE1B3133_en
Building Technologies A fault has occurred 2015-03-31
A fault has occurred
If a fault occurred in the plant, it will appear on the display; in
addition, the LED inside the
button will flash or will be on.
Proceed as follows:
LED flashes:
1. Press the
button to unlock.
2. If the LED keeps flashing, the fault still exists or the
button must be pressed again to unlock.
LED lit:
1. Rectify the fault.
2. If the LED is still lit, the
button must be pressed again
to unlock.
Unlocking is possible only after the cause of fault has
been removed.
In the event of fault, refer to the tips given on page 11.
If you cannot rectify the fault, contact your heating engineer.
Additional information about the display of faults:
Menu Faults current
Here, you can see which faults are currently present. The
following information about each fault is displayed:
· The cause (e.g. pump 1)
· The fault number (important for the heating engineer)
· Date and the time of day the fault first occurred
Menu Fault history
Here, each of the last 10 faults will be listed. The information
given is the same as that provided with current faults.
Menu Fault status signal bus
If your plant includes several interconnected devices, faults
of other controllers will be displayed on your controller.
Quick display of faults
If you keep the ESC button depressed for 2 seconds, the
current fault will be displayed.
Path:
Main menu > Faults
The following tips can help in the event problems occur
General
Before you call in your heating engineer, you should check
the following:
· Is your plant switched on? Check main switch and all
other switches
· Are all fuses of your plant in order?
· Is enough fuel in the tank?
· Have settings been changed by unauthorized persons?
(Time of day, setpoints, etc.)
· Does a fault appear on the display?
The heating always maintains the same room tempera-
ture:
· Check the room operating mode (only
lowers and
raises the room temperature)
· Has the actuator been disconnected from the valve?
Connect it!
The required room temperature is reached either too
early or too late:
· Change the time program
· When the building is well insulated, it takes more time to
cool down
The heat source does not operate any more:
· The burner has initiated lockout. Press the reset button!
· The heating circuit pump and / or the boiler pump does /
do not operate. Check the fuses!
· The fuel tank is empty or the fuel pump does not operate
The heat source operates, but there is no supply of
heat:
· Operate the heating valve manually
Saving energy without sacrificing comfort
· During the day, do not allow the room temperature to exceed
21 °C. Each additional degree increases heating costs by 6
to 7 %
· Guide values for room temperatures in living and working
spaces:
- During the day: Precomfort = 19 °C, Comfort =
20…22 °C
- During the night: Economy = 14…18 °C
- Longer nonoccupancy times, such as holiday periods:
Protection = 10 °C.
Protect objects sensitive to low temperatures, such as
plants!
· Air spaces for only short periods of time, with the windows
fully open
· Set thermostatic radiator valves in unoccupied rooms to
their frost protection position
· Closed shutters and blinds reduce heat losses
· Ensure that there are no curtains, furniture or other objects
in front of the radiators. They reduce the emission of heat
· Check heat energy consumption at regular intervals
If your plant uses a room temperature sensor (or room unit),
it should not be exposed to thermal disturbances since
these have an impact on the control function. For this rea-
son, following applies to the reference room where the
sensor is located:
· Avoid drafts through open doors
· Avoid heat gains caused by people, machines, lighting,
etc., near the sensor
· Ensure that air circulation near the sensor is not obstruct-
ed by curtains, furniture or other objects
· Set thermostatic radiator valves, if present, to their fully
open position
Energy savings do not only conserve our natural resources, they also ensure active environmental protection!
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RMK770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RMK770 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RMK770

Siemens RMK770 User Manual - German - 14 pages

Siemens RMK770 User Manual - Dutch - 34 pages

Siemens RMK770 User Manual - French - 14 pages

Siemens RMK770 Installation Guide - All languages - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info