521720
13
Zoom out
Zoom in
Previous page
1/14
Next page
13 / 14
Siemens Operating Instructions RMH760B, RMK770 CE1B3133_en
Building Technologies Other Info pages 2015-03-31
Other Info pages
To go to the Info pages:
1. Return to the start page by pressing the ESC button.
2. Press the INFO button.
3. Turn the OK knob until the required page appears.
Time switch
For description of the time switch and its settings, refer
to page 6.
Heating circuit
For description of the heating circuit and its settings,
refer to page 5…7. The info pages contain:
· The actual value of the flow temperature
· The flow temperature setpoint
· State
· Cause
· The actual value of the room temperature (only if a
room sensor is used)
· The room temperature setpoint
· The outside temperature (the details given in the
following section “Display values” also apply here!)
Display values (only with RMK770)
The actual outside temperature is displayed provided the meas-
ured value is delivered. Other displays are possible (depending
on the design of your plant).
Fault inputs (only with RMK770)
Fault status messages at the fault inputs are displayed only if
configured.
Device state
Displays in the event of fault:
· Source of fault (e.g. B1 pump. B1 stands for boiler 1, B2 for
boiler 2, etc.)
· Error code (important for the heating engineer)
· Date and time of day the fault occurred
Fault status message bus
If your plant includes several interconnected devices, your
controller can also display faults of other controllers (depending
on the configuration made).
Main menu boiler sequence manager
(Only with RMK770)
Menu Boiler sequence optg mode
· Preselection:
Auto = automatic plant operation (normal situation)
Summer operation = boilers will only be released for
DHW heating
Off = all boilers off; frost protection is ensured
· State:
On = heat generation on
Off = heat generation off
· Cause:
Here, the reason for the state of the boiler sequence
is given.
Menu Inputs / setpoints
Displayed are the values acquired by the inputs and the associ-
ated setpoints and limit values.
Menu Outputs
Displayed are for each output the state and thus the operating
state (on / off, open / closed) of the controlled plant component.
If a plant component is not present, there will be no menu item
either.
Menu Limitations
The current state of the limitations (Active / Inactive) is displayed
(useful information for the heating engineer).
Path:
Main menu > Boiler sequence manager
Main menu boilers (1…6)
(1…6: Several boilers only with RMK770)
Menu Flue gas measuring mode
Refer to page 14.
Menu Boiler operating mode
RMH760B: RMK770:
Preselection:
· Auto = automatic plant
operation (normal situa-
tion)
· Release DHW = boilers
will only be released for
DHW heating
· Off = boiler locked; frost
protection is ensured
Preselection:
· Auto = automatic plant
operation (normal situa-
tion)
· Off = boiler locked; frost
protection is ensured
State:
· Enabled = heat generation released
· Off = heat generation locked
Cause: Here, the reason for the boiler’s state is given
Menu Inputs / setpoints
Displayed are the values acquired by the inputs and the associat-
ed setpoints and limit values. In addition, the hours run counter
and the burner start counter can be read.
Menu Outputs
Displayed are for each output the state and thus the operating
state (on / off, open / closed) of the controlled plant component.
If a plant component is not present, there will be no menu item
either.
Menu Limitations
The current state of the limitations (Active / Inactive) is displayed
(useful information for the heating engineer).
Path:
>
Boiler
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RMH760B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RMH760B in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RMH760B

Siemens RMH760B User Manual - German - 14 pages

Siemens RMH760B User Manual - Dutch - 34 pages

Siemens RMH760B User Manual - French - 14 pages

Siemens RMH760B Installation Guide - All languages - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info