649334
11
Zoom out
Zoom in
Previous page
1/20
Next page
Siemens Building Technologies CE1G3333xx 2015-03-06 11/20
it Italiano
Installazione
Posizione di montaggio
Temperatura ambiente massima ammissibile = 50 °C
Controllo temperatura di mandata:
Sulla mandata riscaldamento, immediatamente a valle
della pompa, se questa è installata sulla mandata
Sulla mandata riscaldamento, a circa 1.5...2 m a valle
della valvola miscelatrice, se la pompa è installata sul
ritorno
Controllo temperatura di ritorno:
a 1...1.5 m a valle del punto di miscela
Limite di minima temperatura ritorno caldaia e limite di
massima temperatura mandata impianto:
a 1...1.5 m a valle del punto di miscela
Controllo temperatura acqua calda sanitaria a.c.s.:
a 1.5...2 m a valle del punto di miscela
Controllo scambiatore di calore:
Il più vicino possibile allo scambiatore di calore
Montaggio
Montaggio regolatore di temperatura ad immersione senza
guaina di protezione.
Procedura:
1. Svuotare l'impianto.
2. Scegliere una delle seguenti posizioni di montaggio:
Il regolatore non può essere mai montato né con la testata rivolta verso il
basso, né con i cavi di collegamento rivolti verso l'alto.
La lunghezza minima d'immersione deve essere di 60 mm.
3
3
3
3
Z
0
4
Il regolatore dovrebbe essere montato in una curvatura con il bulbo
rivolto controcorrente.
3. Utilizzare un nipple filettato autostringente:
4. Fissare il nipple filettato e, se necessario, utilizzare
materiali per guarnizioni (canapa, teflon o similari).
5. Inserire il regolatore all'interno del nipple filettato e
fissarlo:
1
3333Z06
6. Riempire di nuovo l'impianto.
Collegamenti elettrici
Assicurarsi di rispettare tutte le normative elettriche
vigenti
I morsetti di collegamento sono posti sotto la copertura
di plastica flessibile
Disporre i collegamenti secondo l'applicazione
dell'impianto oppure utilizzare gli schemi contenuti nelle
istruzioni di montaggio
Osservare la lunghezza dei cavi ammissibile
Parametrizzare il regolatore e poi fornire la tensione
d'alimentazione
In tutti i casi è richiesto un fusibile di protezione max C
10 A.
Impostazioni
1 LED per modalità test / funzionamento normale
2 DIP switch
3 Impostazione setpoint di ritaratura
4 Potenziometro banda P per Y2
5 Potenziometro banda P per Y1
Modalità operativa:
DIP switch Posizione
DIP switch n. 1 e 2
1 2
Sequenza riscaldamento e raffreddamento
Sequenza riscaldamento/riscaldamento
Una uscita per raffreddamento
Una uscita per riscaldamento
Modalità di controllo:
DIP switch n. 3 e 4
3 4
P (proporzionale)
PI con tempo integrale = 120 s (MEDIUM)
PI con tempo integrale = 240 s (SLOW)
PI con tempo integrale = 60 s (FAST)
Modalità Test:
DIP switch n. 5
5
Modalità Test
Funzionamento normale
Compensazione temperatura esterna:
DIP switch n. 6
6
HIGH
LOW
Banda P per Y1
Potenziometro 5
Impostare il valore in funzione del campo d'impiego di
Y1
Banda P per Y2
Potenziometro 4 Impostare il valore in funzione del campo d'impiego di
Y2
Setpoint di ritaratura:
Cursore potenzio-
metro a slitta 3
Impostare valore se attivo l'ingresso D–M1
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RLE162 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RLE162 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info