Manual Siemens REV34 (page 2 of 2) (English)

465407

Zoom out

Zoom in

1/2

Select operating mode

Press the operating mode button to select one of 5 modes.

Operating modes with time program

The controller offers both time programs Automatic and Exception day .

Do you feel too warm / too cold ?

Press or to set the temperature. The setting is temporary and active only until the

next time the controller activates a change.

Note: To set your own programs, see: "Enter customized temperatures and switching

times".

Continuous operating modes

The controller offers continuous operating modes "Continuous comfort mode“ ,

"Continuous energy saving mode“

and frost protection mode .

Do you feel too warm / too cold ?

Press or to set a continuous temperature.

Enter time and date

Slider in position 1 (time setting): Press or to set the time.

Slider in position 2 (date: Day/month/year): Press or to set the date.

RUN

Reset the slider to the RUN position.

Note: You do not need to enter time and date when DCF77 receiver for the time signal

from Frankfurt (Germany) is equipped. The time display shows PASS.

Enter customized temperatures and switching times

The controller has three different switching patterns that you can allocate to the weekday blocks

1-5, the weekend block 6-7, or to the individual days 1…7.

Proceed as follows:

Select operating mode or .

Slider in position 3 (weekdays

, weekend , individual days ):

Press

or to select the block (weekdays, weekend) or individual day.

Note: Making changes to individual days destroys the corresponding block.

You can only restore a destroyed block by resetting it.

Slider in position 4 (number of comfort phases): Press

or to set the

number of comfort phases.

Slider in position 5 (start time comfort phase 1): Press

or to set the

start time.

Slider in position 6 (temperature comfort phase 1): Press

or to set the

temperature.

Slider in position 7 (end time comfort phase 1): Press

or to set the

end time.

, ,

Slider positions 8…10 (comfort phase 2) and slider positions 11…13

(comfort phase 3): Same procedure as above for comfort phase 1.

Slider in position 14 (energy saving temperature in time switch programs

Automatic and Exception day): Press

or to set the temperature.

Note: The energy saving temperature is valid Monday through Sunday.

It does not depend on operating mode "Continuous energy saving".

RUN

Move the slider to RUN position and close the cover.

Notes (e.g. individual settings):

Enter holidays or absence

You can enter start, temperature and end of your holidays. The controller switches to the set holiday

temperature at the start of the holidays and back to the preset operating mode at the end of the holidays.

During holiday mode, symbol

flashes and the end of the holidays is displayed.

Proceed as follows:

Slider in position 15 (start of absence): Press or to set the start of the holidays (date).

Slider in position 16 (temperature during absence): Press or to set the temperature

effective during the holidays.

Slider in position 17 (end of absence): Press or to set the end of the holidays (date).

RUN

Move the slider back to RUN. Symbol appears to the left of symbol .

To quit holiday mode prematurely, press , , , or move the slider.

Enter temperature for active remote control

With remote control, you are free to select the temperature. Activating remote control immediately

enables control to the remote operating temperature regardless of the current operating mode. After you

switch off remote control, the device returns to the set operating mode.

Symbol

flashes with active remote control.

Proceed as follows:

Slider in position 18 (temperature for active remote control): Press or to set the

temperature for active remote control.

RUN

Move the slider back to RUN.

Reset to factory settings

Press and together with the operating mode button for 3 seconds. All temperature

and time settings are reset to default values.

The clocks starts at 12:00.

Caution: All customized settings are lost !

Factory settings: Heating

, , ,

20 °C

16 °C

8 °C

12 °C

Factory settings: Switching times

Comfort phases P1 P2 P3 P4 P5 P6

1. 07:00 23:00 PASS PASS PASS PASS

2. 06:00 08:00 17:00 22:00 PASS PASS

3. 06:00 08:00 11:00 13:00 17:00 22:00

Activate Party mode

You can activate Party mode only in operating modes and . In Party mode, the device controls

to any selectable temperature for any selectable time.

In Party mode, symbol

is displayed along with the end of Party mode.

Proceed as follows:

B2208en 20.03.2008 Siemens, Building Technologies

1. Press for 3 seconds.

2. Press or to set the duration for Party mode. Party mode can last max. 9 hours.

The entry is accepted after 20 seconds or when you press .

3. Press or to set the temperature.

4. Party mode ends automatically after the Party duration ends or when you press

or .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens REV34 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens REV34

Siemens REV34 User Manual - German - 2 pages

Siemens REV34 User Manual - Dutch - 2 pages

Siemens REV34 User Manual - French - 2 pages

Siemens REV34 Installation Guide - All languages - 50 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens REV34 Manual

Product: