Manual Siemens REV23.03RF (page 7 of 17) (English)

41503

Zoom out

Zoom in

1/17

7/17

Building Technologies Raumtemperaturregler REV23.03RF CE1N2265en

HVAC Products 22.02.2006

Heating engineer level

To access the heating engineer level, keep the «Warmer» and «Colder» buttons de-

pressed and simultaneously roll the roller selector away from the display and then to-

ward the display.

If the displayed temperature does not agree with the room temperature effectively

measured, the temperature sensor can be recalibrated (recalibration to be made on the

heating engineer level.)

The displayed temperature can be matched to the effective room temperature in incre-

ments of 0.2 °C (max. ± 2 °C).

Minimum setpoint limitation to 16 °C prevents undesired heat transfer to neighboring

apartments in buildings with several heating zones. The setting is to be made on the

heating engineer menu.

Optimization brings forward the switch-on point of the first heating period such that the

adjusted setpoint will be reached at the required time.

The setting depends on the type of controlled system, that is, on heat transmission

(type of piping system, radiators), building dynamics (building mass, insulation), and

heat output (boiler capacity, flow temperature).

Optimum start control is switched off at

- 4

- 2

2264D03

- 3

1/4h/°C

1/2h/°C

1h/°C

Start

- 2

- 1

- ½

- 1½

- 1

- ½

- ¼

- ¾

°C

- 1

heating period

(slow controlled system)

(medium controlled system)

(fast controlled system)

(no impact)

Optimum start controll Off

T Temperature (°C) TR

Actual valve of room temperature

t Forward shift of switch-on point (h) P

Starting point of optimum start control

REV23.03RF is a 2-position controller providing PID mode. The room temperature is

controlled by the cyclic switching of an actuating device.

The controller generates the positioning signals depending on the deviation of the set-

point from the actual value acquired by the built-in temperature sensor.

The rate of response to the deviation depends on the selected control algorithm:

The controller is supplied with an active self-learning mode, enabling it to automatically

adapt to the type of controlled system (building construction, type of radiators, size of

the rooms, etc.). After a certain learning period, the controller optimizes its parameters

and then operates with the parameters it has learned.

PID 12 mode Switching cycle of 12 minutes for normal or slow controlled systems

(massive building structures, large spaces, cast-iron radiators, oil

burners).

PID 6 mode Switching cycle of 6 minutes for fast controlled systems (light building

structures, small spaces, plate radiators or convectors, gas burners).

2-Pt mode Pure 2-position control with a switching differential of 0.5 °C (±0.25 °C)

for very difficult controlled systems with considerable outdoor tempera-

ture variations.

For easy commissioning controller is set to 2-Point mode as factory

setting.

Access

Sensor calibration

CAL

Setpoint limitation

Optimum start control

Example using an actual

room temperature of 18 °C

and a setpoint of 20 °C

Control

Self-learning mode

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens REV23.03RF in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens REV23.03RF

Siemens REV23.03RF User Manual - Dutch - 2 pages

Siemens REV23.03RF User Manual - French - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens REV23.03RF Manual

Product: