462306
12
Zoom out
Zoom in
Previous page
1/40
Next page
12/40 02.02.2010 CE1G2203xx
3 Verifica del funzionamento
a) Verificare l’accensione del display. Se risulta spento controllare la
polarità e la carica delle batterie
b) Impostare il modo “Confort Permanente“
, e leggere la
temperatura ambiente visualizzata
c) Impostare il valore di temperatura desiderato (setpoint) ad un
valore superiore alla temperatura ambiente visualizzata (vedi
istruzioni operative)
d) Il relè, e di conseguenza il dispositivo comandato (caldaia,
pompa, valvola ecc.), devono rispondere entro 1 minuto ed il
simbolo
apparire sul display. In caso contrario:
Verificare il dispositivo comandato ed i relativi cablaggi
E’ possibile che la temperatura ambiente sia più elevata del
setpoint impostato
e) Riportare il setpoint di temperature in modo “Comfort Permanente”
al valore desiderato precedentemente impostato
f) Selezionare la modalità di funzionamento voluta.
4 Reset
Reset impostazioni definite dall’utente:
Premere contemporaneamente
, e per 3 secondi:
Tutti i setpoint di temperatura ed i programmi orari impostati tramite il
cursore di programmazione saranno riportati ai rispettivi valori di
fabbrica (vedere la sezione “Impostazioni di fabbrica“ nelle istruzioni
operative). Le impostazioni del livello expert non subiranno invece
alcuna modifica. L’orologio parte dalle ore 12:00 e la data dal 01-01-
08 (01 - Gennaio - 2008). Durante la fase di Reset tutti i settori del
display saranno illuminati e quindi possono essere verificati.
Reset impostazioni definite dall’utente più quelle effettuate a
livello expert:
Premere contemporaneamente il tasto Reset,
e per 5
secondi:
Dopo questo Reset saranno ricaricate tutte le impostazioni di
fabbrica sia del livello utente (cursore di programmazione) sia del
livello expert.
Nota
Il cronotermostato è classificato come dispositivo con software di
classe A e progettato per utilizzo in ambienti con normale grado
di inquinamento.
Montage van REV17..
1 Plaatsing van het apparaat
De REV17.. moet bij voorkeur in de woonkamer worden
geplaatst (voor wandmontage, zie afb. B t/m E).
De montageplaats van de REV17.. moet zodanig worden
gekozen dat de opnemer de ruimtetemperatuur onbelemmerd
kan meten en niet wordt beïnvloed door directe zonnestraling
of andere warmte-, resp. koudebronnen.
min.
10 cm
2261Z03
2 Montage
Zie afbeelding A t/m E.
3 Bedrading controleren
De aansluitingen zijn opgenomen in het hoofdstuk
"Aansluitschema"
Aanwijzing: Geen gevlochten draad gebruiken,
uitsluitend massief draad of gevlochten draad
met adereindhulzen.
4 Aanwijzingen
De plaatselijke voorschriften voor elektrische installaties
dienen te worden opgevolgd.
Als in de woonkamer thermostatische radiator-afsluiters zijn
geïnstalleerd, dan moeten deze volledig worden geopend en
geblokkeerd
Inbedrijfstelling
1 REV17.. inschakelen
Verwijder de zwarte isolatiestrook van het batterijcontact (Fig.
F). Zodra de isolatiestrook wordt verwijderd, is het apparaat
bedrijfsklaar (zie ook de handleiding voor bediening).
2 De taal kiezen
Bij het opstarten wordt het type regelaar linksboven in het
display weergegeven en “DANK U …“ in alle beschikbare talen
op de tekstregel.
Druk op een van de knoppen om de lopende weergave te
stoppen. De taalkeuze begint bij “ENGLISH“
(fabrieksinstelling). Druk net zolang op
of totdat de
door u gewenste taal verschijnt. Druk op
of verplaats de
schuifschakelaar om de gekozen taal te bevestigen (zie ook
afb. G)
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens REV17 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens REV17 in the language / languages: All languages as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens REV17

Siemens REV17 User Manual - English - 2 pages

Siemens REV17 User Manual - German - 2 pages

Siemens REV17 User Manual - Dutch - 2 pages

Siemens REV17 User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info