490911

Siemens REV15 Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
CE1B2225E / 27.01.1999 Subject to alteration Siemens Building Technologies / Landis & Staefa Division
Do you want to change the temperature level
or will you be absent for a short period of
time?
When pressing this button, you change from
the current temperature level to the other. The
display shows either
, when the change
was made from the economy temperature, or
, when it was made from the normal
temperature. This means you can select the
economy temperature during the time you are
absent.
These changes are valid only up to
the next switching point.
Do you want to enter your own temperatures
and heating periods?
The controller has two different switching patterns A and
B which can be assigned to the respective weekday
block 1-5 / weekend block 6-7 (= Auto A/B), or the 24-
hour settings A and B.
Proceed as follows:
A1
Use the setting slider to select the required
switching position (e.g. A1) and press
to enter the required switching
time.
All other switching positions (A2…A6
and B1…B2) are set the same way.
Select «Normal temperature» and press
to set the required value.
Select «Economy temperature» and press
to set the required value.
Auto
Run
Move the setting slider back to this position
and close the cover.
Table for entering selected values
Enter the values set by you in the following table. The
numbers already contained in the table represent
factory settings.
Temp.
6.00 8.00 11.00 13.00 17.00 22.00
Switchin
g
times
A1 A2
A3
A4 A5 A6 B1 B2
7.00 23.00 20° C 16° C
2225Z12E
Will you go on holiday?
You can enter the duration of your holiday period. In
that case, the controller
immediately
switches to
economy mode and back to the selected operating
mode when the holiday period has expired. During the
holiday period, the display shows
and the number of
days left.
Proceed as follows:
Move the setting slider to the holiday symbol
and press
to enter the duration of
the holiday period (99 days max.).
Auto
Run
Move the setting slider back to this position
and close the cover.
If you return from your
holidays earlier than expected, reset the
holiday period to
.
Do you need to change the time of day or the
weekday?
Move the setting slider to the time of day
position and press
to set the
required time of day.
Day
Move the setting slider to the weekday
position and press
to select the
new weekday (1 = Monday…7 = Sunday).
Auto
Run
Move the setting slider back to this position
and close the cover.
Do you wish to return to the factory settings?
°C
By pressing these three buttons
simultaneously, a complete reset is made,
which means that the switching times and
temperatures will be reset to their default
values.
Caution: All individual settings will
be lost!
At the same time, a display check is
made, which looks as follows:
1234567
0 6 12 18 24
AB
2225Z13
Does the symbol appear in the display?
If this symbol appears, you need to replace the batteries
within the next three months.
Do you want to change the batteries?
•
Get two new alcaline batteries type AA, 1.5 V.
•
Remove the battery holder, then the batteries, insert
the new batteries and replace the battery holder.
Caution: The setting data are maintained for a
maximum of one minute only!
•
Make certain the old batteries are disposed of
properly, in compliance with environmental
requirements.
Energy saving tips without sacrificing comfort
•
Never allow room temperatures to exceed 21 °C.
•
Press
to change to economy temperature,
even if you are absent for short periods of time only.
•
Air out the rooms for short periods of time only, but
properly, with the windows wide open.
Auxiliary functions
Your room temperature controller provides a number of
auxiliary functions, but these should only be set by your
heating engineer.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens REV15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens REV15 in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens REV15

Siemens REV15 User Manual - Dutch - 2 pages

Siemens REV15 User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info