41493
2
Zoom out
Zoom in
Previous page
1/3
Next page
Set time of programmer.
T - Set T T Temp.
Set time for on/off in the Auto Mode.
1 time Period. e.g. ON 0700 OFF 2300 hrs.
2 time Period e.g. ON 0600 OFF 0900 > ON 1700 OFF 2200.
Temperatures for T are also set in this setting.
T Temp will be on when Time Periods are off. Setting can be seen
on 24hr clock at bottom of screen.
Program T , T and T temperatures.
Click roller down, scroll roller until "T" starts to flash.
Click roller down, scroll roller until "T " : starts to flash.
Click roller down, scroll roller to set "T " temp. e.g. 19 C.
Click Roller down and repeat steps to adjust other temp.
Factory settings are T 19 C T 16 C and T 5 C.
Click roller down " " will start to flash.
Program time periods to run in Auto.
Click roller down, scroll roller till " " starts to flash.
Click roller down, " " will appear, scroll roller to select number
of time periods you wish to have. e.g. 2 " ." Click roller down.
The indication for "TIME ON" will flash at the bottom of screen " ".
Click roller, scroll to adjust TIME ON. e.g. 0600.
Click roller, scroll to adjust TIME OFF. e.g. 0800.
Click roller, scroll to adjust T for that time period. E.g. 19 C
Click roller and time indication will flash at bottom of screen for 2nd
time period to start.
Click roller, scroll to adjust ON time, e.g. 1700.
Click roller, scroll to adjust OFF time, e.g. 2200
Click roller, scroll to adjust T temp. for that time period. E.g. 20 C
Click roller again to return to Run Mode.
Time/Day of the week (must be done)
Click roller down, scroll roller until " " starts to flash.
Click roller down, scroll roller to set hours. e.g. 13
Click roller down, scroll roller to set minutes. e.g. 15
Click roller down, " T " will start to flash.
To Program
PROGRAMMING COMPLETE. YOU SHOULD NOT HAVE TO USE SCROLL
BUTTON AGAIN UNLESS YOU NEED TO MAKE FURTHER CHANGES. ALL
ADJUSTMENT CAN NOW BE MADE BY TOP BUTTONS.
T
To Program Mode
T
T
PLEASE NOTE: IF SCROLL BUTTON IS NOT PRESSED FOR 10 SECONDS,
THE REV12 WILL GO OUT OF PROGRAMMING MODE AND BACK TO
RUN MODE.
Siemens Building Technologies/HVAC Products - REV12 1.04.05 2/2
2


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-rev12

Reset search

  • I had a battery symbol appear so I changed batteries. Now the display shows every symbol there is and no matter which button I press - nothing happens. I tried the reset button and nothing happened. Help please Submitted on 5-11-2021 at 23:09

    Reply Report abuse
  • I had a battery symbol appear so I changed batteries. Now the display shows every symbol there is and no matter which button I press - nothing happens. I tried the reset button and nothing happened. Help please. Submitted on 19-10-2021 at 10:54

    Reply Report abuse
  • My heating has been off for 5 months. No display on the thermostat so replaced the batteries and reset it. Still no display at all. Help?? Submitted on 31-3-2017 at 00:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens REV12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens REV12 in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens REV12

Siemens REV12 Installation Guide - English, German - 18 pages

Siemens REV12 User Manual - German - 2 pages

Siemens REV12 Installation Guide - Dutch - 18 pages

Siemens REV12 User Manual - Dutch - 10 pages

Siemens REV12 User Manual - Dutch - 2 pages

Siemens REV12 Installation Guide - Danish - 18 pages

Siemens REV12 User Manual - French - 2 pages

Siemens REV12 Installation Guide - French, Italian, Polish, Swedish - 18 pages

Siemens REV12 User Manual - Turkish - 2 pages

Siemens REV12 Installation Guide - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info