41493
5
Zoom out
Zoom in
Previous page
1/10
Next page
5/10
Siemens Building Technologies Ruimtetemperatuurregelaar REV12 CE1N2261nl
HVAC Products 17.02.2003
2261Z02
16
°C
18
20
22
08
10
18
22
h
verwarmings-
periode 1
verwarmings-
periode 2
Bedrijfswij-
zen
Schakeltijden Temperaturen in °C
Dagelijks
1e
verw.
periode
2e
verw.
periode
06:00 09:00 17:00 22:00 19 20
00:00 24:00 19
00:00 24:00 16
00:00 24:00 5
Begrenzing gewenste waarde en PID-regeling zelflerend
Installateursniveau
Door het ingedrukt houden van de warmer- en kouder-toets en het gelijktijdig draaien
van de rolschakelaar, eerst weg van de display en dan in de richting ervan, wordt het
installateursniveau vrijgegeven.
Als de weergegeven temperatuur niet overeenstemt met de werkelijke ruimtetempera-
tuur, kan de temperatuuropnemer worden gecalibreerd.
(Voor een calibratie is toegang tot het installateursniveau nodig.)
De weergegeven temperatuur kan in stappen van 0,2 °C (max. ± 2 °C) naar de werke-
lijke ruimtetemperatuur worden gecorrigeerd.
De minimale begrenzing van de gewenste waarde op 16 °C voorkomt "diefstal" van
warmte in gebouwen met meerdere verwarmingszones.
De REV12 is een tweepunts regelaar met PID-gedrag. De ruimtetemperatuur wordt
door cyclisch Aan- c.q. Uit-schakelen van een apparaat geregeld.
De regeling vormt de besturingssignalen overeenkomstig de afwijking tussen de ge-
wenste waarde en de door de ingebouwde temperatuuropnemer vastgestelde gemeten
waarde.
Afhankelijk van het gekozen regelgedrag voor de regeling reageert de installatie ver-
schillend snel op de afwijking:
Voorbeeld met twee
verwarmingsperioden
per dag
Fabrieksinstellingen
Fabrieksinstellingen
installateursniveau
Toegang
Opnemercalibrering
CAL
Begrenzing gewenste
waarde
Regeling
5


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-rev12

Reset search

  • I had a battery symbol appear so I changed batteries. Now the display shows every symbol there is and no matter which button I press - nothing happens. I tried the reset button and nothing happened. Help please Submitted on 5-11-2021 at 23:09

    Reply Report abuse
  • I had a battery symbol appear so I changed batteries. Now the display shows every symbol there is and no matter which button I press - nothing happens. I tried the reset button and nothing happened. Help please. Submitted on 19-10-2021 at 10:54

    Reply Report abuse
  • My heating has been off for 5 months. No display on the thermostat so replaced the batteries and reset it. Still no display at all. Help?? Submitted on 31-3-2017 at 00:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens REV12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens REV12 in the language / languages: Dutch as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens REV12

Siemens REV12 Installation Guide - English - 18 pages

Siemens REV12 User Manual - English - 3 pages

Siemens REV12 Installation Guide - German - 18 pages

Siemens REV12 User Manual - German - 2 pages

Siemens REV12 Installation Guide - Dutch - 18 pages

Siemens REV12 User Manual - Dutch - 2 pages

Siemens REV12 Installation Guide - Danish - 18 pages

Siemens REV12 User Manual - French - 2 pages

Siemens REV12 Installation Guide - French, Italian, Polish, Swedish - 18 pages

Siemens REV12 User Manual - Turkish - 2 pages

Siemens REV12 Installation Guide - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info