41505
7
Zoom out
Zoom in
Previous page
1/8
Next page
7/8
Siemens Building Technologies Room temperature controller REV100 CE1N2211en
Landis & Staefa Division 16.05.2000
When installing the controller, the base must first be fitted and wired. Then, the unit
can be engaged at the top, swung downward and snapped on
For more detailed information, refer to the installation instructions supplied with the
unit
For the electrical installation, the local safety regulations and standards must be
complied with
The remote control contact T1/T2 must be wired separately, using a shielded cable
The battery transit tab, which prevents inadvertent operation of the unit during trans-
port and storage, must be removed
The control characteristic can be changed with the DIP switch located at the rear of
the unit
If the reference room is equipped with thermostatic radiator valves, they must be set
to the fully open position
If the room temperature displayed does not agree with the measured temperature,
the sensor should be re-calibrated (refer to section "Calibration of sensor").
&RQQHFWLRQGLDJUDP
L
L1
Y1
M1
N1
N
S1
T1 T2
2211A01
A
C
2
4
.
.
.
2
5
0
V
DC 3 V
L Live, AC 24 ... 250 V S1 Remote operating unit (potential-free)
L1 N.O. contact, AC 24 ... 250 V / 8 (3.5) A T1 Remote control signal
M1 Circulating pump T2 Remote control signal
N1 REV100 controller Y1 Regulating unit
0RXQWLQJDQG
LQVWDOODWLRQ
&RPPLVVLRQLQJ
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens REV100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens REV100 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens REV100

Siemens REV100 Installation Guide - English, German, Dutch - 4 pages

Siemens REV100 Additional guide - Dutch - 3 pages

Siemens REV100 User Manual - Dutch - 3 pages

Siemens REV100 User Manual - Dutch - 2 pages

Siemens REV100 User Manual - French - 2 pages

Siemens REV100 Installation Guide - French, Italian, Spanish - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info