456799
6
Zoom out
Zoom in
Previous page
1/12
Next page
6/12
Siemens Building Technologies Product-Data Sheet Radio signal unit REV... CE1N2255en
Landis & Staefa Division 16.10.2000
16...29°C
3...29°C
123
2252Z02
COOLING
HEATING
PUMP ON
PUMP OFF
When using minimum limitation of the setpoint to 16 °C, undesired heat transfer to
neighbouring flats is prevented in buildings that have several heating zones. The func-
tion can be selected with DIP switch no. 2.
DIP switch no.2 is used for switching over to cooling mode when used in cooling appli-
cations.
The setting is made with DIP switch no. 2 while the pump is running. This protects the
pump against seizure during longer OFF periods. The periodic pump run is activated for
one minute every 24 hours at 12:00 h.
123
PID 12
PID 6
2-Pt
4
2252Z03
5°C
3°C
10°C
Self learning
2252Z03
The REV22RF is a 2-position controller providing PID control. The room temperature is
controlled through the cyclic switching of a regulating unit.
The controller is supplied with an active self-learning mode, which enables it to auto-
matically adapt to the controlled system (type of building construction, type of radiators,
size of rooms, etc.). After a certain learning period, the controller optimizes its parame-
ters and then operates in the mode it has learned.
In exceptional cases, where the self-learning mode may not be adequate, it is possible
to choose PID 12, PID 6 or 2-Pt mode:
PID 12 mode Switching cycle of 12 minutes for normal or slow controlled systems
(e.g. massive building structures, large spaces, cast iron radiators, oil
burners).
PID 6 mode Switching cycle of 6 minutes for fast controlled systems (e.g. light
building structures, small spaces, plate radiators or convectors, gas
burners).
2-Pt mode Pure 2-position control with a switching differential of 0.5 °C (±0.25 °C)
for very difficult controlled systems with considerable outside tem-
perature variations.
Frost protection is adjustable with DIP switch no. 2, either 3 °C, 5 °C or 10 °C.
Technical data of controller / transmitter REV22RF
Operating voltage
DC 3 V
Batteries (Alkaline AA)
Battery life
Backup for battery change
2 x 1.5 V
approx. 2 years
max. 1 min
Sensing element NTC
Measurement range
Time constant
68 k at 25 °C
031 °C
max. 2 min
Setpoint setting range
Normal temperature
Economy temperature
3 29 °C
3 29 °C
DIP switch no. 2
Limitation of setpoint
Cooling
Periodic pump run
(pump kick)
DIP switch no. 3
Control
Self-learning mode
Exceptions
Frost protection
General data
controller / transmitter
General data controller
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens REV-R.01-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens REV-R.01-1 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens REV-R.01-1

Siemens REV-R.01-1 User Manual - German - 2 pages

Siemens REV-R.01-1 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info