459668
50
Zoom out
Zoom in
Previous page
1/60
Next page
50 / 60
Siemens RDG100…/RDG110…/RDG140.../RDG160… Basic Documentation CE1P3076.en
Building Technologies Handling 19 Jun 2009
5.2 Operation
See also Operating Instructions B3181 enclosed with the thermostat.
Layout
RDG100
RDG110
RDG140
RDG160
RDG100T
1 Operating mode button / Esc
2 Button to enter the time and to set the timers
3 Fan mode button / OK
4 Rotary knob for setpoint and parameter adjustment
When the thermostat is in normal operation, the actual operating mode and
status are indicated by symbols
When a button is pressed, the thermostat goes into mode selection.
The backlit LCD will turn on, all possible mode selection options (symbols) will
turn on, indicator element (arrow) will appear on the current mode/status
When the button is pressed again, the indicator element will change to the next
mode symbol and so on.
After the last press and a timeout of 3 seconds, the newly selected mode is
confirmed, the other elements disappear
After a timeout of 20 seconds, the LCD backlight will turn off
User action Effect, description
Press left button Go into Operating mode selection
Press left button >3 seconds Set thermostat to Protection mode
Keep left button depressed and
turn rotary knob clockwise
Activate temporary timer "Extend presence"
and set the time (for details, see page 18)
Keep left button depressed and
turn rotary knob counterclockwise
Activate temporary timer "Extend absence"
and set the time (for details, see page 18)
Press left button while "Operating mode
switchover" is activated
Activate "Extend Comfort mode"
(for details, see page 18)
Press right button >3 seconds Activate / deactivate button lock
Press right button for fan coil unit Change fan mode
Press right button for chilled ceiling (P52=0) Set thermostat to Protection mode
Turn rotary knob Adjust the room temperature setpoint
Press left and right button >3 seconds,
release, then press right button >3
seconds
Go to parameter setting mode Service level”
Press left and right button for 3 seconds,
release, press left button for 3 seconds,
then turn rotary knob counterclockwise
min. ½ rotation
Go to parameter setting mode Expert level,
diagnostics and test
Only onRDG100T:
Press center button
Go to timer settings
Button operation
3
1
4
2
1
3
4
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RDG110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RDG110 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RDG110

Siemens RDG110 User Manual - German - 64 pages

Siemens RDG110 User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info