459668
43
Zoom out
Zoom in
Previous page
1/60
Next page
43 / 60
Siemens RDG100, RDG100T, RDG110, RDG140, RDG160 Basic Documentation CE1P3181en
Building Technologies Functions 19 Jun 2009
Reloading the default timer settings
1. Press the program mode button twice to select the “Auto timer setting”
in
programming mode.
2. Press button
(OK) to enter the timer setting mode.
3. Press the program mode button for at least 3 seconds.
“rES” will be displayed.
4. Press button
(OK) to confirm reloading of the default timer settings
or button
(Esc) to leave without change.
The display will show “8888” during the reloading process.
When several timer sequences overlap, the resulting output is the OR combination
of the Comfort mode time of all timers.
A1 = 09:00 – 22:00
A2 = 12:00 – 20:00
Resulting output:
= 09:00 – 22:00
3181D119
09:00 12:00 20:00 22:00
4.12 Handling faults
When the room temperature is outside the measuring range, i.e. above 49 °C or
below 0 °C, the limiting temperatures blink, e.g. “0 °C” or “49 °C”.
In addition, the heating output is activated if the current setpoint is not set to “OFF”,
the thermostat is in heating mode and the temperature is below 0 °C.
For all other cases, no output is activated.
The thermostat resumes Comfort mode after the temperature returns to within the
measuring range.
4.13 Infrared remote control
Use the IRA211 infrared remote control to operate a thermostat with built-in
infrared receiver. The following operations can be carried out remotely:
Select Protection, Comfort or Auto Timer mode
Adjust setpoint in Comfort mode
Select fan mode “Automatic” or “Manual”
A buzzer in the thermostat indicates remote control command reception.
Infrared remote control can be disabled via parameter P70.
Overlapping of timer
sequences
Temperature out
of range
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RDG110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RDG110 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RDG110

Siemens RDG110 User Manual - German - 64 pages

Siemens RDG110 User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info