459668
29
Zoom out
Zoom in
Previous page
1/60
Next page
29 / 60
Siemens RDG100, RDG100T, RDG110, RDG140, RDG160 Basic Documentation CE1P3181en
Building Technologies Functions 19 Jun 2009
4.7.7 4-pipe fan coil unit with electrical heater
On 4-pipe applications with electrical heater, the thermostat controls 2 valves in
heating and cooling mode by manual selection, heating and cooling mode with
automatic changeover, heating only, or cooling only plus an auxiliary electrical
heater. Heating and cooling is factory-set (P01=4).
The electrical heater is used as an additional heat source when the heating energy
controlled by the valve is insufficient.
The electrical heater receives an ON command when the temperature is below
“setpoint” minus “1/2 "dead zone" minus "setpoint differential" (= "setpoint for
electrical heater").
Remote enabling / disabling of the electrical heater is possible via input X1, X2, or
D1 for tariff regulations, energy saving, etc.
Input X1, X2, or D1 must be commissioned accordingly (parameters P38, P40,
P42). See section 4.10 “Multifunctional input”.
An electri
cal heater must always be protected by a safety thermostat!
The heating or cooling output can be released via operating mode button if
parameter P01 is set to manual (P01=2).
See section 4.7.6.
The diag
rams below show the control sequence for 2-position control.
Heating mode with manual selection (P01=2) Cooling mode with manual selection P01=2)
Y
1
0
w
3181D125
T[°C]
½ SDH ½ SDH
Y1
½ SDH ½ SDH
W
D
Y2 (YE)
Y
½ SDC
1
0
½ SDC
w
3181D126
T[°C]
Y3
Heating and cooling mode (P01=4)
T[°C] Room temperature
w Room temperature setpoint
Y2 Control command “El. heater"
Y1 Control command “Valve” or “Comp.” (H)
Y3 Control command “Valve” or “Comp.” (C)
SDH Switching differential “Heating” (P30)
SDC Switching differential “Cooling” (P31)
X
dz
Dead zone (P33)
Y
½ SDC
1
0
½ SDC
w
3181D113
T[°C]
Y3
½ SDH
½ SDH
Y1
½
x
dz
½ x
dz
½ SDH ½ SDH
W
D
Y2 (YE)
w
D
Setpoint differential (P34)
Heating and cooling with
auxiliary heater
Electrical heating in
heating mode
Digital input “Enable
electrical heater”
Caution
4-pipe application with
manual changeover
“Main and secondary
application
ON/OFF control
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RDG110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RDG110 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RDG110

Siemens RDG110 User Manual - German - 64 pages

Siemens RDG110 User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info