555883
51
Zoom out
Zoom in
Previous page
1/82
Next page
51 / 82
Siemens RDF301, RDF301.50, RDF600KN Basic documentation CE1P3171en
Building Technologies Functions 2012-10-04
3.11.8 Fault function on KNX
If a fault occurs (e.g. digital fault input, dew point, communication configuration,
etc.) then a fault will be sent on the bus.
An RDF thermostat listens on the bus and sends its fault when the fault has the
highest alarm priority. This ensures that the management station does not miss any
alarms.
If alarms occur at the same time, the alarm with the highest priority will be first
displayed and sent on the bus.
Fault transmission is different in LTE mode and S-mode:
S-mode LTE mode
Fault state Alarm info (error code + internal information)
Fault information
(internal
information)
Alarm text (default text can be edited with ACS tool)
The table below shows the error code and default alarm texts.
Thermostat Fault information on bus
Prio Fault Display Error code Default fault text
Text
adjustable *)
- No fault --- 0 No fault
1 Bus power supply**) BUS,
BUSF
5000 No bus power
supply
---
2 Device address error
Addr
6001 >1 id device address
---
3 Condensation
4930 Condensation in the
room
4 External fault input X1
AL1
9001 Fault input 1
5 External fault input X2
AL2
9002 Fault input 2
6 Clean filter reminder
FIL
3911 Dirty filter
*) Default alarm texts are stored in the thermostat’s non-volatile memory and can
be adjusted using the ACS commissioning tool
**) This error will not be sent on bus (because there is no bus, not enough bus
power supply, bus is overloaded or bus signal is distorted)
Priority order is #1…6
External faults #4…5: If faults are active, the display will show AL1, AL2,
alternating. On the bus, only the fault with the highest priority will be sent
A supervisor alarm system may command the thermostat to stop sending faults to
the bus via the communication object “Fault transmission” (disable / enable).
This has no impact on the local display of faults.
After a timeout of 48 hours, the sending of faults will automatically be enabled
again.
KNX
R
Priority of alarms
KNX
R
Fault transmission
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RDF600KN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RDF600KN in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RDF600KN

Siemens RDF600KN User Manual - German - 2 pages

Siemens RDF600KN User Manual - Dutch - 2 pages

Siemens RDF600KN User Manual - French - 2 pages

Siemens RDF600KN Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info