620387
3
Zoom out
Zoom in
Previous page
1/4
Next page
3/4 Operating Instructions CB1B1426en_01 / 2013-07-05 Siemens Building Technologies
Option 2: Time switch with the same 7-day settings
(P11=1)
Set
Ok
+
Mode
!
You can set the time switch so that all
settings apply to the 7 weekdays.
Example:
0 6 12 24
18
1 2
Visible bars: Control to Comfort
temperature
Invisible bars: Control to Economy
temperature
Proceed as follows:
1) Press
+ or to select the zone.
2) Set the parameter (P11=1). Please refer
to section "Do you want to change
parameters".
3) Press Set and select
AUTO
.
4) Press Ok to confirm.
5) Time switch for Mon (1) Sun (7) is
displayed.
6) Press Ok to initiate time programming.
During programming:
7) Press Mode to select the operating mode
(Comfort or Economy) or
8) Press
+ or to set the time of day in 15-
minute steps for the selected operating
mode.
9) Press Ok to save the settings.
10) Press Mode or wait for the program to
exit automatically.
Note:
Repeat the above steps to program the
remaining zones.
Information on the "Fil Pilote" standard
setpoints
The RDE1001FP is a programmer used to manage the
operating modes.
The setpoints are managed by your electrical radiators or
heaters.
Please refer to the respective Operating Instructions.
According to the "Fil Pilote" standard:
The Comfort setpoint must be set directly on the
thermostat of the electrical radiator or heater.
The Economy setpoint is 3 °C below the Comfort
setpoint.
The Protection setpoint is fixed at 7 or 8 °C.
Option 3: Time switch with 5-2-day settings
(P11=2)
Set
Ok
+
Mode
!
You can set Monday - Friday and Saturday -
Sunday at the same time.
Example:
0 6 12 24
18
1 2
Visible bars: Control to Comfort
temperature
Invisible bars: Control to Economy
temperature
Proceed as follows:
1) Press
+ or to select the zone.
2) Set the parameter (P11=2). Please refer
to section "Do you want to change
parameters?".
3) Press Set and select
AUTO
.
4) Press Ok to confirm.
5) Time switch for Mon (1) Fri (5) is
displayed.
6) Press
+ or to select Mon (1) Fri (5) or
Sat (6) Sun (7).
7) Press Ok to confirm the selection and
initiate time programming.
During programming:
8) Press Mode to select the operating mode
(Comfort or Economy), or
9) Press
+ or to set the time of day in 15-
minute steps for the selected operating
mode.
10) Press Ok to save the settings.
11) Repeat steps 6-10 for the other period if
necessary, otherwise
12) Press Mode or wait for the program to
exit automatically.
Note:
Repeat the above steps to program the
remaining zones.
Factory default for 7-day time switch
Default
value
Day/s Comfort mode Economy mode
Mo (1)
Fr (5)
6:00 8:00 hr
17:00 22:00 hr
22:00 6:00 hr
8:00 17:00 hr
Sa (6)
Su (7)
7:00 22:00 hr 22:00 7:00 hr
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RDE100FP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RDE100FP in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RDE100FP

Siemens RDE100FP User Manual - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info