555888

Siemens RDE100.1RFS Manual

3
Zoom out
Zoom in
Previous page
1/4
Next page
3/4 Operating Instructions CB1B1425en_01 / 2014-11-26 Siemens Building Technologies
Option 2: Time switch with the same 7-day settings
(P11=1)
Set
Ok
+
–
Mode
You can set the time switch so that all settings
apply to the 7 weekdays.
Example:
0
6
12
24
18
1 2
Visible bars: Control to Comfort temperature
Invisible bars: Control to Economy
temperature
Proceed as follows:
1) Set the parameter (P11=1). Please refer to
section "Do you want to change
parameters".
2) Press Set and select
AUTO
.
3) Press Ok to confirm.
4) Time switch for Mon (1) - Sun (7) is
displayed.
5) Press Ok to initiate time programming.
During programming:
6) Press Mode to select the operating mode
(Comfort or Economy) or
7) Press + or – to set the time in steps of 15
minutes for the selected operating mode.
8) Press Ok to save the time switch.
9) Press Mode or wait for the program to exit
automatically.
Option 3: Time switch with 5-2-day settings (P11=2)
Factory default of 7-day time switch
Default
value
Day/s Comfort mode Economy mode
Mo (1) –
Fr (5)
6:00 – 8:00 hr
17:00 – 22:00 hr
22:00 – 6:00 hr
8:00 – 17:00 hr
Sa (6) –
Su (7)
7:00 – 22:00 hr 22:00 – 7:00 hr
Do you want to pair transmitter and
receiver?
+
–
Learn
Mode
The RDE100.1RF communicates with the
RCR100RF at a frequency of 433 MHz.
To pair transmitter and receiver, proceed as
follows:
RCR100RF receiver setting:
1) Press and hold the LEARN button on the
RCR100RF for at least 3 seconds and
then release it.
2) Red and green LEDs flash alternately to
indicate receiver is in learning mode.
RDE100.1/RF transmitter setting:
3) On the transmitter, set the parameters
(refer to section "Do you want to change
parameters?").
4) Check to ensure that parameter P19 is not
0, because this would mean that the
wireless function is disabled. By default,
parameter P19 is 1.
5) Proceed to parameter P20. Press Mode
and parameter P20=0 (OFF) flashes.
Adjust the value by pressing + to change
to P20=1 (ON), then press Mode to
confirm.
6) During the stages of wireless learning, the
LCD displays "rF" and "Lrn". Wait for time
out, and the transmitter exits the
parameter setting mode.
Successful wireless learning:
7) The green LED on the RCR100RF flashes
for 10 minutes to indicate that the receiver
has successfully completed wireless
learning.
Recommendation:
8) Additional test to ensure the wireless
signal is fine:
On the RDE100.1/RF, change the
operating mode by pressing Mode or
change the setpoint by pressing + or –.
On the RCR100RF, the green LED should
flash for 3 seconds before changing to
constantly green. At the same time,
observe your radiator, boiler or heater
indication (if it has one) to ensure that it
changed the operating mode.
9) If step 7 or 8 is working fine, this means
you have successfully paired the units.
Unsuccessful wireless learning:
10) If the RCR100RF fails to receive wireless
data, the red LED starts to flash **.
Repeat steps 1 to 8 until pairing is
successful.
!
Note:
Always start receiver learning before starting
pairing with the transmitter.
The units must be placed such that transmitter
and received signals have limited external
wireless interference.
**In normal operation, if a drop in wireless
communication occurs due to unforseeable
noise, just leave the receiver and it will recover
automatically.
The pairs are saved even if there is a power
shut down. Communication restarts
automatically after several minutes without any
user action.
set
ok
+
–
mode
You can set Monday - Friday and Saturday -
Sunday at the same time.
Example:
0
6
12
24
18
1 2
Visible bars: Control to Comfort temperature
Invisible bars: Control to Economy
temperature
Proceed as follows:
1) Set the parameter (P11=2). Please refer
to section "Do you want to change
parameters".
2) Press Set and select
AUTO
.
3) Press Ok to confirm.
4) Time switch for Mon (1) – Fri (5) is
displayed.
5) Press + or – to select Mon (1) – Fri ( 5) or
Sat (6) - Sun (7).
6) Press Ok to confirm the selected period
and initiate time programming.
During programming:
7) Press Mode to select the operating mode
(Comfort or Economy) or
8) Press + or – to set the time in steps of
15 minutes for the selected mode.
9) Press Ok to save the time switch.
10) Repeat steps 5-9 for the other period if
necessary or
11) Press Mode or wait for the program to exit
automatically.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RDE100.1RFS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RDE100.1RFS in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RDE100.1RFS

Siemens RDE100.1RFS User Manual - German - 3 pages

Siemens RDE100.1RFS User Manual - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info