555892

Siemens RDE100.1RF Manual

2
Zoom out
Zoom in
Previous page
1/4
Next page
2/4 Operating Instructions CB1B1432en_01 / 2013-07-05 Siemens Building Technologies
Are your rooms too warm/too cold?
+
–
Ok
Set
Mode
Press + or
– to increase or decrease the
room temperature setpoint in increments of
0.5 °C/1 °F. Proceed as follows:
• Press
+ or – to change the setpoint
temporarily.
This readjustment is reset as soon as
the operating mode changes
• Press Ok, Set or Mode to save the
setting or wait for the program to exit
automatically
• To lock the setpoints, use parameters
P06 and P08
Do you want to change the operating
mode?
Mode
!
The thermostat provides Comfort, Economy
and automatic mode. Changeover between
the operating modes can be made manually
by pressing Mode.
Comfort mode is the permanent (24 h)
selection of Comfort. Select this operating
mode to maintain Comfort temperature
permanently without any time switch. It is
used during occupancy periods, for
example.
Economy mode is the permanent (24 h)
selection of Economy. Select this operating
mode to maintain the Economy temperature
permanently without any time switch.
It is used during non-occupancy periods
(e.g. at night).
AUTO
In Auto Timer mode, the operating
modes (Comfort, Economy) are changed
automatically according to the time switch
setting.
Note:
Frost protection is a function always active
in the background. As soon as the room
temperature falls below 5 ºC, the unit
automatically activates heating
.
Do you want to set permanent temperature
setpoints?
Set
Ok
+
–
Mode
!
• Press Set and select
• Press Ok to confirm
• Press Mode to select the operating
mode (Comfort or Economy)
• Press
+ or – to adjust the setpoint
permanently
• Press Ok to confirm
• Press Mode to exit or wait for a timeout
to exit automatically
Note:
This permanent setpoint is used during Auto
Timer mode.
Energy saving tips without loss of
comfort
• Select Auto Timer mode for the heating period, and
set the time switch according to your normal habits at
home
• Select Economy or Holiday mode for longer periods
of non-occupancy and the summer period
Do you want to set your Holiday mode?
Set
Ok
+
–
Mode
!
Use the Holiday mode to set the thermostat
to a constant room temperature while
absent.
• Press Set and select
• Press Ok to confirm
• Press
+ or – to adjust the temperature
setpoint
• Press Ok to confirm
• Press
+ or – to set the number of days
for holidays (0 = Holiday mode Off)
• Press Ok to save the setting
• When Holiday mode is activated, the
remaining days are displayed
Note:
If you press Mode while Holiday mode is active, the
function is deactivated and symbol
disappears.
If the Comfort and Economy setpoints are both
locked, the lowest locked setpoint is the Holiday
mode setpoint. You can adjust the setpoint from 5 ºC
up to the lowest locked setpoint
.
Do you want to enter your own time switch?
Option 1: Time switch with individual day settings
(P11=0)
Set
Ok
+
–
Mode
You can select Comfort or Economy mode
in steps of 15 minutes throughout the day.
The 0:00 to 24:00 hour time bar allows you
to set the operating mode for the selected
day(s).
Example:
0 6 12 24
18
1 2
Visible bars: Control to Comfort
temperature
Invisible bars: Control to Economy
temperature
When Auto Timer mode is enabled,
changeover between the operating modes is
automatic after the settings are saved.
Proceed as follows:
1) Press Set and select
AUTO
.
2) Press Ok to confirm.
3) Time switch for Mon (1) is displayed.
4) Press
+ or – to select the weekday, from
Mon(1) to Sun(7).
5) Press Ok to confirm the selection and
initiate time programming.
During programming:
6) Press Mode to select the operating mode
(Comfort or Economy) or
7) Press
+ or – to set the time in steps of
15 minutes for the selected mode.
8) Press Ok to save the time switch.
9) Repeat steps 4-8 for all remaining days (if
required) or
10) Press Mode or wait for the program to
exit automatically.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RDE100.1RF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RDE100.1RF in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RDE100.1RF

Siemens RDE100.1RF User Manual - German - 4 pages

Siemens RDE100.1RF User Manual - Dutch - 4 pages

Siemens RDE100.1RF User Manual - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info