620503
4
Zoom out
Zoom in
Previous page
1/4
Next page
4/4 Operating Instructions CB1B1423en_01 / 2013-03-08 Siemens Building Technologies
Do you want to change the parameters?
+
ok
mode
If you want to change control parameters, proceed as
follows:
Press
+
and
simultaneously for 5 seconds
Release them and parameter "P01" is displayed
on the bottom segment
Press
+
or
to scroll to the parameter that
needs to be adjusted
Press ok to select this parameter
Press
+
or
to adjust the value
Press ok to confirm the adjusted value
Press mode to exit the parameters without
saving or wait for the program to exit
automatically
Parameter list
Parameter
no.
Description Setting range (default)
P01 Time format 1 = 24:00 hours (default)
2 = 12:00 AM/PM
P02 Selection of °C or °F 1 = °C (default)
2 = °F
P03 Standard
temperature display
1 = room temperature (default)
2 = setpoint
P04 Temperature sensor
calibration
-3…3 °C
Step 0.5 °C
(-6…6 °F, step 1 °F)
Default: 0 °C
P06 Comfort setpoint lock 0 = OFF (default)
1 = ON locked according to
setting in permanent
temperature setpoint
P08 Economy setpoint
lock
0 = OFF (default)
1 = ON locked according to
setting in permanent
temperature setpoint
P09 Buzzer 0 = OFF
1 = ON (default)
P10 Show frost protection
icon
0 = OFF (default)
1 = ON
P11 Time switch type for
autotimer and DHW
0 = individual Days (default)
1= all 7 days
2= 5/2 days
P12 Periodic pump run 0 = OFF (default)
1 = ON
P13 DHW timer bar
timeout
00 = no DHW bar
1 = 1 minute (default)
2 = 2 minutes
Adjustable range 0 to 15
minutes
P21 Button scanning rate
for the capacitive
buttons
Note: a higher
scanning rate means
shorter battery life.
0.2 = 0.25 s
0.5 = 0.5 s
1.0 = 1.0 s (default)
1.5 = 1.5 s
P22 Reload factory
settings
0 = OFF (default)
1 = reload
P23 Software version
information
No adjustment possible
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RDE100.1DHW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RDE100.1DHW in the language / languages: English as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RDE100.1DHW

Siemens RDE100.1DHW User Manual - German - 4 pages

Siemens RDE100.1DHW User Manual - Dutch - 4 pages

Siemens RDE100.1DHW User Manual - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info