Manual Siemens pa 0840 m (page 44 of 159) (English, German, Dutch, French, Italian, Portuguese, Spanish)

134209

Zoom out

Zoom in

1/159

Cleaning and Maintenance

• Remove the basic filter from the appliance,

Fig. 20.

• Insert the double active filter + positioner in

the basic filter as shown on Fig. 22,

remembering that it must be housed on the

lower studs first.

1° Lift the flap until it comes out of its

lower supports, (Fig. 23: a).

2° Position the plastic leg in the front

groove on the appliance (in T position)

and slide it down to the safety stop,

(Fig. 23: b).

3° fit the lower studs in the front stops on

the appliance making sure that the

plastic leg fitted in the previous step

does not come out of position,

(Fig. 23: c).

When finished, the user should make sure

that the flap is fitted properly and does not

fall when opened again. (The door opens

up to the safety stop). If not fitted properly,

repeat steps 1° and 2° again.

Fig. 21

• Install the assembly onto the appliance by

lining the lower studs up with the slots on the

front casing of the appliance and pressing the

top clip in until it clicks into position. The

assembly is fitted properly when it clicks into

position.

• Close the front flap.

Warning!

Fit only one set of filters onto the support

in order to ensure correct appliance

operation.

Note

The flaps on these models are fitted with

safety stops up to which point they can be

opened without risk of the front flap falling

and causing damage and/or injury. The

front flap can also be removed in order to

clean the appliance or change the filters

more easily, see Fig. 18. Afterwards, or

should for any reason the flap come out of

its original housing, proceed as follows to

fit it:

clack!

Fig. 22

Fig. 23

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens pa 0840 m in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens pa 0840 m Manual

Product: