Manual Siemens pa 0840 m (page 36 of 159) (English, German, Dutch, French, Italian, Portuguese, Spanish)

134209

Zoom out

Zoom in

1/159

The symbol disappears from the screen when

the water tank has been emptied and replaced

on the appliance properly.

Warning!

When you turn the appliance back on again

after emptying all of the water, do not forget

to replace the removable tank on the

appliance properly. Should you fail to do

so, the symbol will not disappear from the

screen and the appliance will not work.

Remember that when the appliance is

turned off, it is necessary to wait for

approximately 3 minutes before the

compressor starts up again. This period of

time is required in order to ensure correct

appliance operation.

Dehumidification

In this operation function, the appliance

reduces the humidity in the atmosphere. The

appliance purifies the air in the room at the

same time in order to create a pleasant

atmosphere.

❏ Plug the appliance into the mains electricity

supply.

❏ Fit the hot air expulsion tube outside as

indicated in “Preparing the appliance before

use“.

❏ Lift the air director on the top of the

appliance.

There are two ways of expelling condensed

water: via the removable tank and in

continuous mode.

Dehumidification via the removable tank:

• Check that the removable tank is fitted onto the

appliance properly and that the plug is fitted

onto the water drainage pipe to prevent water

from leaking onto the support surface.

• When the water in the removable tank reaches

a certain level, the appliance beeps twice. T h e

removable tank full symbol appears on the

screen at the same time to indicate that the

tank needs to be emptied. The appliance stops

working when this happens. The symbol also

appears and the appliance beeps when the

removable tank is not properly fitted into its

h o u s i n g .

• In both events, it is necessary to extract the

tank and pour the water carefully down the

nearest drain.

❏ Turn the appliance on by pressing the "On"

key .

❏ Select the cooling function , (see

"Selecting the operation function").

❏ Select the desired temperature, (see

"Selecting the temperature"). If the

appliance turns itself off automatically

because the desired temperature for the

room has been reached, it will not start

working again until ambient temperature

rises 2-3°C.

❏ Select the operation speed, (see "Selecting

the speed").

During air conditioning, the condensed water

produced evaporates automatically and is

expelled outdoors together with the expelled

air through the hot air expulsion tube.

In conditions of extreme humidity, the

appliance accumulates condensed water in

the appliance’s rear tank. When a certain level

the appliance beeps twice. The removable

tank full symbol appears on the screen at

the same time to indicate that the tank needs

to be emptied. The appliance stops working

when this happens. To empty the removable

tank, press the handle and remove the tank

carefully. Empty the water down the nearest

drain.

Instructions for Use

Fig. 17

❏ Plug the appliance into the mains electricity

supply.

❏ Lead the hot air expulsion tube outside,

(see "Preparing the appliance before use").

❏ Check that the plug is fitted onto the water

drainage pipe to prevent water from leaking

onto the support surface.

❏ Lift the air director on the top of the

appliance, Fig. 17.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens pa 0840 m in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens pa 0840 m Manual

Product: