299043

Siemens optiset standard Manual

18
Zoom out
Zoom in
Previous page
1/38
Next page
14
You can press the Program key, if one appears on your phone,
to reach the Program/Service? prompt.
Also notice the service code numbers in the lower left of the
subprompts available through the Program/Service prompts.
From the Program/Service prompt, you can dial these numbers
to go directly to these submenus. Similarly, the subsections
within the submenus have numerals that you can dial to go to
those subsections.
Audio Settings?
(also available from the Program/Service
menu) lets you adjust the following audio settings for your
phone: ring volume, ring tone, alert tone volume, and
speakerphone mode.
Feature Keys and Access Codes
You can also press feature keys to gain access to Siemens
telephone system features such as Hold, Transfer, Mailbox, and
Program. Since your phone has already been assigned a set of
feature keys, it may not have some of the feature keys described
here. However, you may still use any feature available on your
system and permitted by your class of service by dialing its
feature access code, if it has one. This guide explains the basic
steps for using many features, including the default feature
access codes. Your system administrator may have configured
both the acronyms for feature keys and the access codes
differently from how they appear here.
Volume Keys
Use the Volume Up and Volume Down keys to adjust
the voice volume of your telephone. While on a call, press
to raise the volume of the voice you are hearing, or press
to
lower it. Press either key until you reach the desired voice level.
Holding down either key only changes the volume one step.
When you hang up or switch to another call, the voice volume
returns to the default level. Or you can store the new setting to
override the default setting before hanging up, by pressing the
(Select) key or by pressing the and
keys
together, before you hang up.
PROGRAM/SERVICE
>
1-Change destinations?
+
-
+
-
✓
+
-
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens optiset standard at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens optiset standard in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info