Manual Siemens optipoint 400 standard (page 36 of 131) (English)

300388

Zoom out

Zoom in

1/131

Step by Step

Making Calls – Convenience Functions

Opening the door with a code (at the door):

o After ringing the bell, enter the five-digit code (using the

keypad or a DTMF transmitter). Depending on how the

door opener has been programmed, a doorbell call sig-

nal may or may not be forwarded.

Activating the door opener:

Press the key. The LED lights up

Select and confirm.

qlm Enter the code.

o Dial the entrance telephone number.

o Enter the five-digit code. Default code = "00000".

Select the displayed function and press the "OK" dialog

key to change the code.

Select and confirm.

You can also open the door without a doorbell ring.

Deactivating the door opener:

Press the key. The LED lights up.

Select and confirm.

rlm Enter the code.

Accepting a Call From an Answering Ma-

chine

You can accept a call from any answering machine if the

machine is connected to your system (contact your ser-

vice personnel) and you have programmed the answer-

ing machine number on a key Æ Page 60.

The LED lights up. Press the key.

Program/Service

89=Door opener on?

3=change password?

1=enable with ring?

2=enable w/o ring?

Program/Service

#89=Door opener off?

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens optipoint 400 standard in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens optipoint 400 standard Manual

Product: