680376

Siemens OpenStage SL4 professional op HiPath Cordless IP Manual

72
Zoom out
Zoom in
Previous page
1/80
Next page
72 Appendix
Appendix
Troubleshooting
Some malfunctions can be resolved without outside intervention. The following table provides a
list of such malfunctions. All other malfunctions should be reported to the relevant service person
-
nel.
Error Possible cause Remedy
No display. The handset is not switched on. Press the On-hook key until con-
firmation is received.
Batteries are empty. Charge or replace the batteries.
You cannot dial an external
number.
The handset is locked. Unlock the handset.
No reaction to keystroke. Keypad lock activated. Press the hash key until confir-
mation is received.
The key is stuck. Release the key.
De-crescendo tone sequence
during input.
An incorrect entry was made. Repeat key sequence while
watching the display; where ap
-
plicable, consult the operating in-
structions.
The line "Base n" flashes (n=
1 - 4).
The handset is outside the
base radio range; radio signals
too weak.
Come closer to the base radio
range, change your position.
Handset not registered. Register the handset.
Intervals between synchronisa-
tion attempts are too long.
Switch off the handset and
switch it back on again.
No ringer on the handset. The ringtone is deactivated. Activate ringer.
"Do Not Disturb" is activated. Deactivate "Do Not Disturb".
The following, for example,
appears:
Base 1
Outgoing and incoming calls
and activation/deactivation
are not possible.
Handset is blocked. Remove the batteries from the
handset and then re-insert them.
Proceed as when loading batter
-
ies for first time Page 15.
The following appears:
incomplete!
Maximum input time was ex-
ceeded.
Avoid long pauses between key-
strokes.
The On-hook key was not
pressed.
Press the On-hook key.
The following appears:
incomplete!
The communication system is
overloaded.
Wait and try again later.
The following appears:
Currently not accessible
Function is currently not avail-
able.
Wait and try again later.
No connection under the phone
number dialled available.
Enter the phone number correct-
ly or call the attendant console.
… 72 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens OpenStage SL4 professional op HiPath Cordless IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens OpenStage SL4 professional op HiPath Cordless IP in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens OpenStage SL4 professional op HiPath Cordless IP

Siemens OpenStage SL4 professional op HiPath Cordless IP User Manual - Dutch - 93 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info