680392

Siemens OpenScape DECT Phone S5 on OpenScape Cordless Enterprise Manual

72
Zoom out
Zoom in
Previous page
1/85
Next page
72 More features
Using a different telephone in the same way
as your own
You can log on to another telephone belonging to the HiPath 4000 system using
a personal identification number (PIN). This also applies to telephones in net-
worked HiPath 4000 systems, for example at other company locations. At the
other telephone you can then
• make calls and assign the charges to cost centers,
• make calls and assign the charges to specific projects,
• check your mailbox,
• enter appointments.
Using an internal PIN, you can have your calls diverted to a telephone in the
office or department where you will be for a temporary period (call forwarding -
"follow me").
Prerequisite: You have been assigned a PIN by your administrator. You require
an internal PIN for calls within your own HiPath 4000 system, while for calls
involving other HiPath 4000 systems in the integrated network you require a
network-wide PIN.
u Open the system menu.
> < [ Select and confirm the basic service.
Either:
L Enter the service code
(61 for PIN 1, 62 for PIN 2, etc.).
Or:
> < [ Select the menu item and confirm.
> < [ Select the menu item and confirm.
If you have several PINs and wish to use another one, select the other PIN.
then:
You are prompted to enter the PIN by the message "Enter station no." or "Enter
ID" on the display.
The following applies within your own HiPath 4000 system:
o Enter your internal PIN.
The following applies within your own and anothersystem within the
integrated networkHiPath 4000:
o Enter the 2-digit node ID of your own HiPath 4000 system (consult your
administrator).
o # Enter your own number and press the hash key.
o # Enter the network-wide PIN and press the hash key.
Dialing after (successful) identification:
You will hear the dial tone. The following appears on the display:
"Please dial".
Note:
The function must be approved for your communications system.
BASIC SERVICE
PIN / COS?
PIN 1?
… 72 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens OpenScape DECT Phone S5 on OpenScape Cordless Enterprise at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens OpenScape DECT Phone S5 on OpenScape Cordless Enterprise in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info