297732
47
Zoom out
Zoom in
Previous page
1/71
Next page
Setup46
© Siemens AG 2003, E:\Auftrag\Siemens\MobilePhones\M75
Sirius\en\KA\S_SIR_Setup.fm
Template: X75, Version 2.1; VAR Language: en; VAR issue date: 050224
left page (46) of M75 SIRIUS SUG en, A31008-H7430-A1-1-7619 (18.04.2005, 12:03)
Auto mode
Your phone is "visible" to other BT
devices for several minutes. You will
then be asked if "visibility" should
continue.
Data services
Default setting and activation of the
connection profiles for MMS, WAP ap-
plications. The phone default setting
varies from service provider to serv-
ice provider. Consult your service
provider or go to this address on the
Internet for more information
www.siemens.com/
mobilephonescustomercare
in the "FAQ" section.
HTTP profile
The phone default setting varies
from service provider to service pro-
vider. Consult you service provider
or go to this address on the Internet
for more information
www.siemens.com/
mobilephonescustomercare
in the "FAQ" section.
Authentication
Activate or deactivate encrypted
dial-up (CSD connections only) for
Internet access.
Fax/data
Send voice/fax b
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rec. voice/fax
b
Start the required communication
program on your PC and activate
the function on the phone during
the call (the PC will take over the
connection).
Rec. fax/data
b
The call is signalled by a special ring-
tone and the type of call (fax or data)
is displayed in the phone display. Now
start the communication program on
your PC to receive the fax/data.
Security
C ¢T¢Security
¢Select function.
Auto key lock
The keypad is locked automatically
if no key has been pressed for one
minute in standby mode. This pre-
vents the phone from being used
accidentally. However, you can still
be called and you can still make an
emergency call.
Shown in the display
¨ Bluetooth switched on.
©
Bluetooth visible to others.
Additional information
Block/unblock in standby mode. In each
case:
#
Press and hold.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens m75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens m75 in the language / languages: Dutch as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info