788798
7
Zoom out
Zoom in
Previous page
1/24
Next page
Basic operation en
7
7.5 Switching off intensive mode
To select a fan setting of your choice, press ⁠.
7.6 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
The fan run-on removes remaining odours and is used
to dry the odour filter after the cooking process.
Press ⁠repeatedly until the fan run-on is switched
on.
aLED1 for the fan setting lights up in the LED dis-
play. LED6 flashes for the fan run-on.
aThe appliance switches off automatically after ap-
prox. 10 minutes.
7.7 Switching off the fan run-on
Press ⁠.
aThis temporarily stops the fan run-on.
7.8 Switching on automatic mode1
The optimum fan setting is set automatically using a
sensor.
Press ⁠.
aIn the LED display, LED6 lights up for automatic
mode.
7.9 Switch off automatic mode 1
Press ⁠.
aThe appliance switches to the fan setting that was
previously set.
aThe ventilation is automatically ended when the
sensor detects no further change in the room air
quality.
aAutomatic mode runs for a maximum of four hours.
7.10 Intermittent ventilation
With interval ventilation, the ventilation system switches
on and off in the selected setting for the selected time.
Note:This function is only available in the HomeCon-
nectapp.
If the interval ventilation is switched on, LED6 continu-
ously flashes in the LED display for the interval ventila-
tion and the LED for the selected fan setting lights up.
As soon as the ventilation time ends, the LED for the
fan setting you have selected goes out. LED6 contin-
ues to flash.
7.11 Sensor control1
In automatic mode, a sensor in the appliance detects
the intensity of the cooking and roasting fumes. De-
pending on the setting of the sensor sensitivity, the op-
timum fan setting is automatically switched on.
If the sensor control system reacts too weakly or too
strongly, the setting for the sensor sensitivity may
change.
¡Default setting: Fan setting3
¡Lowest setting: Fan setting1
¡Highest setting: Fan setting5
7.12 Setting the sensor control1
Requirement:The appliance is switched off.
1. Press and hold ⁠and ⁠for approx. 3 seconds.
2. Press ⁠or ⁠ to change the setting.
To cancel the setting, press ⁠.
3. To save the setting, press and hold ⁠and ⁠ for ap-
prox. 3 seconds.
Or wait approx. 10seconds until the setting is
saved automatically.
aA signal tone sounds as soon as the selected set-
ting is saved.
7.13 Resetting the saturation indicator
After cleaning the grease filter or after changing the
odour filter, the saturation indicator can be reset.
Requirements
¡After the appliance has been switched off, LED1
flashes in the LED display for the grease filter satura-
tion display and/or LED2 flashes for the saturation
indicator for the odour filter.
¡A signal sounds repeatedly.
Press ⁠.
aThe saturation indicator is reset.
7.14 Setting the saturation indicator
The saturation indicator must be adjusted depending
on the filter used.
Requirement:The appliance is switched off.
1. Press and hold ⁠and ⁠for approx.three seconds.
To set circulating-air mode (non-regenerable fil-
ter), press ⁠/ ⁠ until LED2 lights up in the LED
display.
To set circulating-air mode (non-regenerable fil-
ter), press ⁠/ ⁠ until LED3 lights up in the LED
display.
To convert the electronic control back to opera-
tion without the air recirculation filter, press ⁠/ ⁠
until LED1 lights up on the LED display.
2. To save the setting, press and hold ⁠and ⁠for ap-
prox. three seconds.
Or wait approx. 10seconds until the setting is
saved automatically.
To cancel the setting, press ⁠.
aA signal tone sounds as soon as the selected set-
ting is saved.
7.15 Switching on the lighting
Press ⁠ to switch on the lighting.
Note:Colour temperature settings are available in the
HomeConnect app provided the appliance has this
function.
7.16 Switching off the lighting
Switch off the lighting with ⁠.
1Depending on the appliance specifications
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LR18RPU25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LR18RPU25 in the language / languages: English as an attachment in your email.

The manual is 9.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LR18RPU25

Siemens LR18RPU25 User Manual - German - 24 pages

Siemens LR18RPU25 User Manual - Dutch - 24 pages

Siemens LR18RPU25 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info