671508
58
Zoom out
Zoom in
Previous page
1/428
Next page
Bedienoberfläche
2.8 Menüleiste
LOGO!Soft Comfort Online-Hilfe
58 Betriebsanleitung, 11/2017
Dynamischer Server-IP-Filter (Seite 94)
Uhrzeitsynch. mit EM-Schalter (Seite 82)
NTP-Einstellungen (Seite 87)
2.8.1.12
Datei -> Eigenschaften - Allgemein
In diesem
Register können Sie Namen und IP-Adresse Ihres Geräts eingeben. Sie können
die Adresse, Subnetzmaske und das Gateway für die Zuordnung einer IP-Adresse zum
LOGO! Basismodul eingeben.
Im Feld
Programmname
kann für das Schaltprogramm ein Programmname mit bis zu 16
Zeichen eingegeben werden. Nach der Übertragung wird das Schaltprogramm im
integrierten LOGO! Display unter seinem Namen angezeigt.
2.8.1.13
Datei -> Eigenschaften - Hardwaretyp
Dieses
Register zeigt die Basisinformationen zu LOGO! Basic an, wie z.B. bekannte Blöcke,
Konstanten/Verbindungsklemmen und die Anzahl der Digitaleingänge.
2.8.1.14
Datei -> Eigenschaften - E/A-Einstellungen
Wenn Sie das Schaltprogramm herunterladen, überträgt LOGO!Soft Comfort auch die E/A-
Einstellungen an LOGO!.
Mit der
Einstellung können Sie das Verhalten der Analogausgänge von LOGO! einstellen,
wenn die LOGO! in STOP ist und den Bereich der Ausgangswerte festlegen. Sie haben
folgende Möglichkeiten.
Für "Verhalten der Analogausgänge in STOP" können Sie eine der folgenden Optionen
wählen:
Alle Ausgänge bleiben auf dem letzten Wert
AQ1 bis AQ8 werden auf von Ihnen definierte Werte gesetzt
r "Wertebereich der Analogausgänge einstellen" können Sie eine der folgenden Optionen
wählen:
0 mA bis 20 mA oder 0 V bis 10 V
4 mA bis 20 mA
Mit der Einstellung
können Sie bei Bedarf die optionalen AI3 und AI4 an den Geräten
LOGO! 0BA6, 0BA7 und 0BA8, die vier Analogeingänge haben können, aktivieren. Bei den
Geräten LOGO! 0BA6, 0BA7 und 0BA8, die jeweils vier Analogeingänge unterstützen,
können Sie auswählen, wie viele Sie nutzen möchten. Sie haben folgende Möglichkeiten:
0 AIs aktivieren: Kein AI für Ihr Diagramm verfügbar.
2 AIs aktivieren: Nur AI1 und AI2, die den Eingangsklemmen I7 und I8 entsprechen,
stehen zur Verwendung im Schaltprogramm zur Verfügung.
4 AIs aktivieren: AI1 und AI2, die den Eingangsklemmen I7 und I8 entsprechen, stehen
zur Verwendung im Schaltprogramm zur Verfügung. Zusätzlich sind AI3 und AI4, die den
Eingangsklemmen I1 und I2 entsprechen, zur Verwendung verfügbar.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: German as an attachment in your email.

The manual is 12,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - English - 414 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info