Manual Siemens LOGO Soft Comfort Online Help (page 357 of 414) (English)

671508

357

Zoom out

Zoom in

1/414

Reference material

5.3 Special functions

LOGO!Soft Comfort Online Help

Operating Instructions, 11/2017

357

Description of the function

In RUN mode, a 0 to 1 transition of the signal at input En triggers the output of your

configured message text on the display. The message text is closed after a 1 to 0 transition

at input En and if the acknowledgment attribute is not set. If the acknowledgment attribute is

set, the message text is not closed until input En=0 and the message is acknowledged at the

LOGO! with OK. The status at output Q remains 1 as long as the message text is displayed.

Of several message text functions triggered with En=1, the one with the highest priority is

displayed. Low-priority messages can also by displayed by pressing the

button on the

LOGO!.

You can switch between the standard display and the message text display by means of the

LOGO! buttons

and .

Restrictions

Up to five message text functions are available.

Particular characteristics to be noted when configuring

The message text can be configured in the block properties dialog. You can enter up to four

lines for each message text (the text display of the LOGO! has four rows) and set the priority.

You can move to the next line using the cursor keys or the mouse. Hit the [ENTER] key to

confirm all your entries in the block properties dialog and to close the dialog.

You may also enter the actual values of other blocks in the text lines. To do so, select the

relevant block from the

Block

dialog. A

Parameter

dialog opens to display a list of all

parameters available for the selected block. The block parameter you select in this dialog is

written to the selected text line. The actual parameter value is now included when you call

the message text.

Set the "Acknowledge message" attribute to specify whether a message is be acknowledged

before it is closed.

Simulation mode

Layout of message texts (Page 158)

Special functions (Page 241)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens LOGO Soft Comfort Online Help Manual

Product: