671508

Siemens LOGO Soft Comfort Online Help Manual

342
Zoom out
Zoom in
Previous page
1/414
Next page
Reference material
5.3 Special functions
LOGO!Soft Comfort Online Help
342 Operating Instructions, 11/2017
Connection
Description
Parameter
Text:
Input of the message text
Par:
Parameter or actual value of another, already configured , which can be dis-
played numerically or as a bar graph (see "Visible parameters or actual values")
Time:
Shows the continuously updated time-of-day
Date:
Shows the continuously updated date
EnTime:
Display of the time of the 0 to 1 transition of the signal at input En
EnDate:
Display of the date of the 0 to 1 transition of the signal at input En
I/O Status Names:
Display of a digital input or output status name, for example "On"
or "Off". LOGO! 0BA7 devices can display the status names of following elements:
• Digital inputs
• Digital outputs
• Flags
• Cursor keys
• LOGO! TD function keys
• Shift register bits
• Function block outputs
Analog Input:
Display of analog input value to the shown in message text and updat-
ed according to the analog time.
Scale time (0BA7 only): Display of the actual value of a referenced function block as a
time value scaled based on the timebase configured for the message text function
block. Possible time display formats are as shown below:
• hours : minutes : seconds . milliseconds
• hours : minutes : seconds
• hours : minutes
• hours
(for example, "
01: 20 : 15 .15
")
Symbol (0BA7 only): Display of characters selected from the supported character sets
Output Q
Q remains set as long as the message text is queued.
Settings
In addition to the function block inputs and the parameters of the message text, the following
settings provide additional control over the display of message texts:
●
Character set selection:
You can choose to compose a message text from characters
from the primary character set or the secondary character set. You set the two character
sets from either the "Msg Config" menu on the LOGO! Base Module, or by using the
LOGO!Soft Comfort File → Message Text Settings (Page 54) menu command.
●
Message destination:
You can choose to display the message text on the
LOGO! onboard display, the LOGO! TD, or both.
●
Tick settings:
The message text can tick or not tick, meaning it can scroll on and off the
display. The tick capabilities and your choices are described in more detail below.
… 342 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info