671508
329
Zoom out
Zoom in
Previous page
1/414
Next page
Reference material
5.3 Special functions
LOGO!Soft Comfort Online Help
Operating Instructions, 11/2017
329
Updated value PV = (PV * gain) + offset
If the updated value PV = SP, then the special function does not change the value of AQ.
Dir = upwards/+ (timing diagram numbers 1 and 3)
If the updated value PV > SP, then the special function reduces the value of AQ.
If the updated value PV < SP, then the special function increases the value of AQ.
Dir = downwards/- (timing diagram number 2)
If the updated value PV > SP, then the special function increases the value of AQ.
If the updated value PV < SP, then the special function reduces the value of AQ.
With a disturbance, AQ increases or decreases until the updated value PV again
corresponds to SP. The speed with which AQ changes depends on the parameters KC and
TI.
If the input PV exceeds the parameter Max., then the updated value PV is set to the value of
Max. If the PV falls short of the parameter Min., then the updated value PV is set to the value
of Min.
If the input R is 1, then the AQ output is reset. As long as R is set, the input A/M is disabled.
Sampling time
The sampling time fixs at 500 ms.
Parameter sets
In order to simplify the use of the PI controller, the parameters for KC, TI and Dir are already
given as sets for the following applications:
Parameter set
Application example
Parameter
KC
Parameter
TI (s)
Parameter
Dir
Temperature
fast
Temperature, cooling control of small
spaces; small volumes
0.5 30 +
Temperature
slow
Heating, ventilation, temperature, cool-
ing control of large spaces; large vol-
umes
1.0 120 +
Pressure 1 Quick pressure change, compressor
control
3.0 5 +
Pressure 2 Slow pressure change, differential pres-
sure control (flow controller)
1.2 12 +
Full level 1
Vat and/or reservoir filling without drain
1.0
99:59
+
Full level 2
Vat and/or reservoir filling with drain
0.7
20
+
Characteristics when configuring
Observe the control and regulate basics (Page 319).
329


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info