671508
316
Zoom out
Zoom in
Previous page
1/414
Next page
Reference material
5.3 Special functions
LOGO!Soft Comfort Online Help
316 Operating Instructions, 11/2017
Simulation in LOGO!Soft Comfort
With simulation in LOGO!Soft Comfort you can read the following values:
Physical value; the ranges are stipulated by the measuring range (3)
Standardized value
Measurement range
Analog value (after processing gain and offset)
Analog value on the analog output
5.3.4.3
Possible settings with LOGO!
If you directly program your circuit program on the LOGO!, then you can only enter the gain
and offset parameters. You can calculate the gain and offset as follows:
External value range
min
Sensor
- max
Sensor
:
Range of a physical quantity that the sensor can measure.
Standardized value range
min
norm
- max
norm
:
Value range of the standardized values.
With sensors that provide 0 to 10 V or 0 to 20 mA, the standardized value range is 0 1000.
With sensors that provide 4 to 20 mA, the standardized range is 200 1000.
So for gain and offset it follows:
Gain
= (max
Sensor
- min
Sensor
) / (max
norm
min
norm
)
Offset
= [(min
Sensor
x max
norm
) (max
Sensor
x min
norm
)] / (max
norm
min
norm
)
If you have calculated either the gain or the offset in accordance with the formulas above,
you can then calculate the respective other value in accordance with the following formula:
Gain
= (min
Sensor
- Offset) / min
norm
Offset
= (min
Sensor
(Gain x min
norm
)
316


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info