671508
275
Zoom out
Zoom in
Previous page
1/414
Next page
Reference material
5.3 Special functions
LOGO!Soft Comfort Online Help
Operating Instructions, 11/2017
275
5.3.2
Counters
5.3.2.1
Up/Down counter
Short description
An input pulse increments or decrements an internal value, depending on the parameter
setting. The output is set or reset when a configured threshold is reached. The direction of
count can be changed with a signal at input Dir.
Connection
Description
Input
R
You reset the output and the internal counter value to the start value (StartVal)
with a signal at input R (Reset)
Input
Cnt
This function counts the 0 to 1 transitions at input
Cnt
. It does not count 1 to 0
transitions.
Use the inputs I3, I4, I5, and I6 for high-frequency counts (LOGO!
12/24RCE/RCEo, LOGO! 24CE/24CEo): max. 5 kHz, if the fast input is di-
rectly connected to the Up/Down counter function block
Use any other input or circuit element for low-frequency counts (typically 4
Hz).
Input
Dir
Input
Dir
(Direction) determines the direction of count:
Dir = 0: Up
Dir = 1: Down
Parameter
On
: On threshold / Value range: 0 to 999999
Off
: Off threshold / Value range 0 to 999999
Start Value
: Initial value from which to begin counting either down or up.
Retentivity on = the status is retentive in memory.
Output Q
Q is set and reset according to the actual value at Cnt and the set thresholds.
Parameters On and Off
The on threshold On and the off threshold Off can be provided by the value of another
already-programmed function:
Analog comparator: Ax - Ay
Analog threshold trigger: Ax
Analog amplifier: Ax
Analog multiplexer: AQ
Analog ramp: AQ
Mathematic instruction: AQ
PI controller: AQ
Up/Down counter: Cnt
275


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info