671508

Siemens LOGO Soft Comfort Online Help Manual

265
Zoom out
Zoom in
Previous page
1/414
Next page
Reference material
5.3 Special functions
LOGO!Soft Comfort Online Help
Operating Instructions, 11/2017
265
Par
You specify whether the timer pulses on for one cycle when activated and is then
reset. The pulse parameter applies to all three cams.
Output Q
Q is set when the configured cam is actuated.
Timing diagram (three practical examples)
Description of the function
Each weekly timer is equipped with three cams. You can configure a time hysteresis for each
individual cam. At the cams you set the on- and off-hysteresis. The weekly timer sets the
output at a certain time, provided it is not already set.
The weekly timer resets the output at the off-time if you configured an off-time, or at the end
of the cycle if you specified a pulse output. A conflict is generated in the weekly timer when
the on-time and the off-time at another cam are identical. In this case, cam 3 takes priority
over cam 2, while cam 2 takes priority over cam 1.
The switching status of the weekly timer is determined by the status at the No1, No2 and
No3 cams.
On-times
The on-time is any time between 00:00 h and 23:59 h. You can also configure the on-time to
be a pulse signal. The timer block will be activated at the specified time for one cycle and
then the output is reset. The off-time is disabled in this case as it is not applicable.
Special characteristics to note when configuring
The block properties window offers a tab for each one of the three cams. Here you can set
the day of the week for each cam. Each tab offers you in addition an option of defining the
on- and off-times for each cam in hour and minute units. Hence, the shortest switching cycle
is one minute. Also on each tab you have the option of specifying a pulse output for the cam.
You can disable the on- and off-times individually. You can achieve switching cycles
extending across more than one day, for example, by setting the on-time for cam 1 to
Monday 7:00 h and the off-time of cam 2 to Wednesday 13:07 h, while disabling the on time
for cam 2.
… 265 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info