671508
212
Zoom out
Zoom in
Previous page
1/414
Next page
Sample applications
4.4 Fill station
LOGO!Soft Comfort Online Help
212 Operating Instructions, 11/2017
The parameters for the analog comparator are as follows:
Sensor: No sensor
Gain: 1
Offset: 0
On Threshold value: 4
Off Threshold value: 0
The analog comparator switches on the output Q2 if the difference between the flow tempera-
ture and the standardized outdoor temperature exceeds 4 °C.
If the difference falls below 0 °C, the analog comparator switches the output Q2 off again.
Output Q2 switches the heating on and off.
Mode of operation
The outdoor temperature drops, which causes the value issued to the analog amplifier at
B004 to increase to the same extent. The difference at the analog comparator between the
flow and the outdoor temperature increases accordingly.
If the difference exceeds 4 °C the heating switches on.
By switching on the heating, the flow temperature increases. Because of this, the difference
at the analog comparator between the flow and the outdoor temperature decreases
(provided the outdoor temperature drops more slowly than the flow temperature increases).
If the difference falls below 0 °C, the heating switches off.
Changing parameters
The Offset parameter at the analog amplifier at B004 depends on your desired flow
temperature at 0 °C outdoor temperature. Furthermore, the switch-on threshold and the
switch-off threshold of the heating can change by means of the On and Off threshold values
of the analog comparator at B005.
Try it out!
The example can be found as a circuit program on the LOGO!Soft Comfort DVD-ROM. Load
the circuit program in LOGO!Soft Comfort and try out the instructions above in simulation
mode.
212


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info