671508
208
Zoom out
Zoom in
Previous page
1/414
Next page
Sample applications
4.1 Air-conditioning system
LOGO!Soft Comfort Online Help
208 Operating Instructions, 11/2017
The fresh-air fan may only be switched on if the flow sensor signals the safe operational
state of the extractor fan.
A warning lamp indicates failure of one of the fans.
Standard solution
The fans are under monitoring by means of flow sensors. If the sensors registered no air flow
after a short delay time has expired, the system is switched off and an error message is
generated, which can be acknowledged by pressing the off button.
Fan monitoring requires an analyzer circuit with several switching devices, in addition to the
flow sensors. A single LOGO! device can replace this analyzer circuit.
LOGO!Soft Comfort solution
The use of LOGO! reduces the amount of switchgear. Thus, you save installation time and
space in the control cabinet. You may even be able to use as a smaller control cabinet.
With LOGO! you can also switch off the fans sequentially after the system is switched off.
The circuit in LOGO!Soft Comfort
The system is switched on and off at the inputs I1 and I2. The fans are connected to outputs
Q1 and Q2, the flow sensors are connected to the inputs I3 and I4. Blocks B007 and B008
are used to set the watchdog times after which the flow sensors should send a signal to the
fault output Q3.
208


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info