671508

Siemens LOGO Soft Comfort Online Help Manual

205
Zoom out
Zoom in
Previous page
1/414
Next page
Tutorial
3.5 Practical example
LOGO!Soft Comfort Online Help
Operating Instructions, 11/2017
205
Saving the file to a storage medium
Before you transfer your circuit program, you should save it once again. Choose the relevant
command from the menu and enter a program name and path.
Printing the circuit program
Use the File → Print (Page 53) command to print a copy of your circuit program. From this
dialog you specify the print format and the details to be included or omitted.
3.5.12
Transferring the circuit program
Password protection
To protect your process solution and prevent unauthorized access to your circuit program,
you can assign a password before you transfer it to LOGO!.
To assign this password, use the Parameter tab of the File → Properties (Page 55) menu
command dialog. Enter your password and confirm it with OK.
Password protection is used when you transfer the circuit program to LOGO! and is activated
when LOGO! exits transfer mode.
The password protects your circuit program in LOGO!. Editing values and parameters, or
viewing the circuit program in LOGO!, or uploading the circuit program from LOGO! to the
PC is now only possible after you have entered the password.
Transferring the circuit program
Finally, transfer your circuit program to a suitable LOGO! version and then connect the
module. Connect LOGO! with the consumer devices in your project.
You have created the circuit program under LOGO!Soft Comfort within a very short time and,
compared with conventional methods, you have saved yourself a considerable amount of
time and effort.
3.5.13
Performing an online test of the circuit program
After you are satisfied with your program simulation and have downloaded it to LOGO! Base
Module, you can also perform an online test of the circuit program. An online test is similar to
simulation in that you can view inputs and outputs and block parameters. It differs, however,
in that you are testing the program running in the LOGO! Base Module with "live" inputs
rather than testing the program on the PC with simulated inputs.
The following example shows an online test of the practical example circuit program. In this
example, input I1 was turned on and then turned off. The off-delay timer began counting
when I1 was turned off:
… 205 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info