671508

Siemens LOGO Soft Comfort Online Help Manual

151
Zoom out
Zoom in
Previous page
1/414
Next page
Tutorial
3.2 Getting started with program creation
LOGO!Soft Comfort Online Help
Operating Instructions, 11/2017
151
If you do not connect a line to a suitable target connector, LOGO!Soft Comfort reconnects it
to its initial position after you "release" the mouse button.
3.2.2.3
Replacing blocks
To replace a block in your circuit program with another function block, follow these steps:
1. Insert the new block above or below the block you want to replace.
2. Rewire the connecting lines of the old block to the new one as described under "Editing
selected connecting lines" in Editing selected objects (Page 150).
3. After having rewired all the connecting lines, you can delete the old block and move the
new block into this position.
Example for the FBD Editor:
By keeping this block replacement order, you can maintain your connecting lines. If you first
delete the old block, you also delete its connections, which means you have to recreate all
connections.
In a LOGO! 0BA7 and LOGO! 0BA8 Base Module, you can directly replace an old block by
dragging the new block from the block tree to the old block figure with the left mouse key
pressed.
3.2.2.4
Cutting connections
It may turn out to be difficult to interpret the layout of a large circuit, especially if it contains
many line crossings. You can clean up your connection layout, using the "Cut/Join" tool of
the programming toolbar.
→
Cut/Join (Page 41)
Click a connection after you have called this tool. The selected connecting line is graphically
split. However, the link between the blocks remains active.
The open ends of the cut connection are now shown with arrowhead icons, which indicate
the direction of the signal flow. Above the icons, you can now see the cross-references,
including the page number of the circuit program, the block name and the number of the
block terminal that is connected to the open link.
… 151 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info