LOGO!Soft Comfort Online Help
Operating Instructions, 11/2017
141
Prerequisites for working with the tutorial
To use this tutorial, you must be familiar with PC operation and you must know how to create
a function block diagram. To download your circuit programs, you also need a PC cable, SD
card or Ethernet cable for connecting the PC interface to your LOGO! device.
Getting started with program creation
You are going to learn the basics of working with LOGO!Soft Comfort by creating a simple
circuit program and simulating it on your PC. Towards the end of this chapter, you will find a
few sample applications (Page 193) for LOGO!Soft Comfort, and information on how to
prepare, transfer and archive your application.
If necessary, review the elements of the user interface (Page 29) before beginning the
tutorial.
Factory door (Page 209)
Air-conditioning system (Page 207)
Heating control (Page 210)
Fill station (Page 213)
Creating a circuit program
Developing a circuit program
Perform these tasks to develop a circuit program:
1. Create a new circuit program (Page 142).
2. Select blocks (Page 142)
3. Place the blocks (Page 142)
4. Configure and comment the blocks (Page 143)
5. Connect the blocks (Page 144)
6. Optimize the circuit program (Page 149)
7. Save the circuit program (Page 155)
Note that not all blocks are available (Page 146) under all circumstances.