671508

Siemens LOGO Soft Comfort Online Help Manual

134
Zoom out
Zoom in
Previous page
1/414
Next page
User interface
2.8 Menu bar
LOGO!Soft Comfort Online Help
134 Operating Instructions, 11/2017
2.8.5.43
Tools -> Options: Cut Connections
Here you can choose to cut connections via the Cut/Join (Page 41) either manually or
automatically.
You can specify one or both of the following types of connections to be cut:
● Connections on import or on upload
● Connections routed across a block
● Connections exceeding a configurable length
In the radius text box you can choose either to input the radius points directly or to use the
scroll bar.
After confirming these settings, LOGO!Soft Comfort will cut connections accordingly.
If you configured LOGO!Soft Comfort to cut connections during importing or uploading, the
software cuts connections according in the following cases:
● When you upload (transfer) a circuit program from LOGO! to LOGO!Soft Comfort
● When you import (open) a circuit program created with LOGO!Soft Standard or
LOGO!Soft Comfort
2.8.5.44
Tools -> Options: Simulation
Here you can configure the simulation parameters and its displayed status:
● For starting a simulation:
– You can choose whether to start the simulation automatically when you switch to
simulation mode. Otherwise, you must press the green arrow icon
to start
simulation from simulation mode.
– You can choose whether to automatically simulate network communication when the
IP address is accessible. Otherwise, you must press the icon
to start simulation in
network.
– You can specify whether to reset the status of inputs and outputs at the start of
simulation.
● For interface display:
– You can also specify whether to switch the display of signal states and process
variables on or off in simulation mode. Switching it off improves the performance of
your simulation because when you disable the display of signal states and process
variables, there is no need for LOGO!Soft Comfort to calculate these values
continuously.
– In addition, you can specify whether to display a separate simulation window for text
messages on the LOGO! TD/LOGO! TDE. If selected, simulation mode shows active
message texts for the LOGO! Base Module and the LOGO! TD/LOGO! TDE in
separate windows.
– You can specify whether to show the elapsed time for simulation in standard 12 hour
format.
… 134 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info