671508

Siemens LOGO Soft Comfort Online Help Manual

41
Zoom out
Zoom in
Previous page
1/414
Next page
User interface
2.7 Toolbars
LOGO!Soft Comfort Online Help
Operating Instructions, 11/2017
41
2.7.3.3
Cut/Join
You can use this tool to cut and join connections between blocks. Left-click the Cut/Join icon
to activate the tool. To cut a connection, left-click the relevant line while the Cut/Join tool is
active. When you cut a connection of two blocks, a reference to the partner block appears
beside each of the block. The reference displays the page number, block number and the I/O
of the partner block.
Cut connections (Page 151)
2.7.3.4
Text tool
You can use this tool to insert or edit user-defined text objects in the programming interface.
You can create labels for specific blocks. These labels remain with the block whenever you
move or delete the block. You can associate only one label per block. For each label, you
can specify the font type, font size, and font color. To create an associated label, click
directly on the required block when the text tool is selected.
There can only be one associated label for each block.
You can configure "Wrap Text" format for the label text figures. You can adjust the size of a
text figure typically by dragging the rectangle handles. You cannot enlarge or reduce the
dimension of text figures that are not in Wrap Text format.
See also Documentation of the circuit program (Page 153)
2.7.3.5
Page Layout
In the
Page Layout
tab, you can specify how and on how many pages to print your circuit
program. You can preview the pagination in this tab. If you choose more than one program
page, LOGO!Soft Comfort indicates the page breaks with green lines. When you
subsequently print the circuit program, LOGO!Soft Comfort uses this pagination. Note that
connections extending to other pages are simply cut off when you print the hardcopy.
Siemens recommends you create cross-references by splitting the file at this position with
the help of the Cut/Join tool (Page 41). In the File → Page Setup (Page 53) menu you can
specify the paper size, page alignment and margins.
The total number of pages(horizontal x vertical) must not exceed 100.
The standard toolbar (Page 36) also contains an icon for this menu command.
2.7.3.6
Conversion tool
Use this function to convert your circuit program between LAD and FBD.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info