671508
26
Zoom out
Zoom in
Previous page
1/414
Next page
LOGO!Soft Comfort V8.2
1.8 LOGO! with AS-Interface (0BA0-0BA2)
LOGO!Soft Comfort Online Help
26 Operating Instructions, 11/2017
1.8
LOGO! with AS-Interface (0BA0-0BA2)
1.8.1
AS-Interface
Introduction
Here in this section, you discover what you must note when using a LOGO! with integrated
AS-Interface.
Converting circuit programs
The LOGO!Soft Comfort converts the circuit programs with AS-Interface inputs (Page 27) or
AS-Interface outputs (Page 27) which were created for previous versions of the modular
LOGO! are converted:
When you assign a circuit program to a LOGO! Basic via Tools → Select Hardware
(Page 97)
When you download a circuit program without changes to a LOGO! Basic
If you cut one or more AS-Interface inputs or outputs of an older circuit program and pasted
them into the circuit program for a LOGO! Basic, the inserted I/O is also converted in the
new circuit program.
Conversion rules
The inputs Ia1 to Ia4 are converted to I13 to I16.
Outputs Qa1 to Qa4 are converted to Q9 to Q12.
After conversion, the info window shows you which AS-Interface I/O was converted to that of
the modular LOGO!. If the conversion is not compatible to your physical hardware structure,
you must adapt the block numbers of the relevant I/O via the block properties dialog.
Additional constants and connecting terminals
Note that LOGO! versions 0BA0 to 0BA2 do not distinguish between standard inputs and
AS-Interface inputs. Due to the modular structure of the devices as of version 0BA3, the
block number of a digital, analog or AS-Interface block is determined by the slot position of
the expansion module.
AS-Interface inputs (Page 27)
The relevant LOGO! versions are also equipped with Ia inputs used for the ASi bus
(Page 27).
Modular LOGO! devices as of the series 0BA3 do not distinguish between normal inputs and
AS-Interface inputs. The user determines the type of input based on the modules used and
the order in which they are installed. This is why AS-Interface inputs are here displayed only
as I input.
AS-Interface outputs (Page 27)
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info