671508
19
Zoom out
Zoom in
Previous page
1/414
Next page
LOGO!Soft Comfort V8.2
1.4 What's new in LOGO!Soft Comfort?
LOGO!Soft Comfort Online Help
Operating Instructions, 11/2017
19
The analog math error detection SFB is renamed "Mathematic instruction error detection".
Additionally, LOGO!Soft Comfort V7.0 supports new reference parameters for some blocks,
such as timer blocks and the analog filter block.
New LOGO! Base Modules
Two new LOGO! Base Modules are commercially available:
LOGO! 12/24RCE
LOGO! 230RCE
The main change of the functionalities of these two new base modules is that the new ones
have the Ethernet capability. For detailed information about these two base modules, refer to
your product information and the
LOGO! Manual
.
New features
LOGO!Soft Comfort V7.0 together with the LOGO! 0BA7 hardware series provides the
following new features:
S7 communication: Base Modules can communicate with each other on an Ethernet
network as well as with SIMATIC controllers or SIMATIC HMI devices with Ethernet
capability.
UDF (User-defined function) Editor
SD card support
Data log
Online test of the network transfer data and message text
Diagnostics for networking errors and SD card Read/Write errors
Simulation of the network
Ability to identify LOGO! 0BA7 firmware version
I/O name import/export
I/O status
LOGO! Base Module slave mode configuration
Ability to display reference information in circuit program
Block replacement
Remote change of parameters
Changed functionality
LOGO!Soft Comfort V7.0 provides changes in the following areas:
Maximum number of blocks increased from 200 to 400
Amount of program memory (RAM) increased from 3800 to 8400 bytes
Number of analog flags increased from 6 to 16
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO Soft Comfort Online Help at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO Soft Comfort Online Help in the language / languages: English as an attachment in your email.

The manual is 12,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO Soft Comfort Online Help

Siemens LOGO Soft Comfort Online Help User Manual - German - 428 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info