671504
173
Zoom out
Zoom in
Previous page
1/188
Next page
Additional information on SMS
B.2 SMS error messages
LOGO! CMR2020, LOGO! CMR2040
Operating Instructions, 12/2017, C79000-G8976-C356-04
173
Follow the points below to make sure that all SMS messages are sent within the required
time:
Adapt the length of the interval for large amounts of data to be sent cyclically, e.g. PI-
SMS messages (monitor SMS) accordingly.
Make sure that there is enough time between different actions sending PI-SMS
messages.
If, for example, a PI-SMS message requested using SMS was sent incompletely, repeat your
request SMS message.
SMS error messages
You will find a list of all possible error messages in SMS error messages (Page 173).
B.2
SMS error messages
Message
Possible causes
OK
The SMS command was executed successfully.
Invalid Command SMS keyword could not be recognized.
Check the uppercase/lower case characters and syntax.
Invalid Parameter
Transfer parameter not correct; password not correct.
No Success Values could not be set or read.
Try Again The CMR is currently being reconfigured. The request can-
not be processed.
No connection to LOGO! BM
LOGO! BM not activated or wrong IP address set.
Cable between LOGO! BM and LOGO! CMR discon-
nected
No GPS Signal
GPS not configured
GPS signal cannot be received because there is no line
of sight to the GPS satellite.
Not supported by LOGO! BM The setting of bits in the VM of the LOGO! BM is not sup-
ported by this device version. To use a VM variable of the
type BIT, you need a LOGO! BM with at least a hardware
product version FS:04 and the firmware version V1.81.01.
173


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO CMR2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO CMR2020 in the language / languages: English as an attachment in your email.

The manual is 10,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO CMR2020

Siemens LOGO CMR2020 User Manual - German - 192 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info