671504
43
Zoom out
Zoom in
Previous page
1/188
Next page
Installation, connecting up, commissioning
3.3 Connecting up the device
LOGO! CMR2020, LOGO! CMR2040
Operating Instructions, 12/2017, C79000-G8976-C356-04
43
Mounting
To mount the CMR on a DIN rail, follow the steps below:
1. Fit the upper part of the locking mechanism
of the device on to the DIN rail.
2. Press the device down against the DIN rail until the spring catch
locks in place.
Removal
To remove the CMR from a DIN rail, follow the steps below:
1. Using a screwdriver, pull down the spring catch on the rear of the device
.
2. Remove the device from the DIN rail.
Wall mounting
To mount the CMR on a wall, follow the steps below:
1. Using a screwdriver, pull the two spring catches
on the rear of the device towards the
outside.
2. Feed the screws through the openings in the catches and secure the device to the wall.
3.3
Connecting up the device
3.3.1
X1P1 (LAN) interface
Connecting the X1P1 (LAN) interface
Connect your local area network, the PC or the BM to interface X1P1 (LAN connection) of
the CMR.
The interface supports autonegotiation and autocrossing. For the connection, use a patch
cable with an RJ-45 plug. For the requirements and for information on grounding see below.
You will find the properties of the X1P1 interface in the technical specifications.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LOGO CMR2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LOGO CMR2020 in the language / languages: English as an attachment in your email.

The manual is 10,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LOGO CMR2020

Siemens LOGO CMR2020 User Manual - German - 192 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info