671506
6
Zoom out
Zoom in
Previous page
1/36
Next page
CMK2000
6 A5E36847555A/001, 11/2015
WARNING
Connection to safety extra low voltage / protective extra
low voltage only.
May cause death or serious injury
The equipment is designed for operation with safety extra
low voltage (SELV) with safe electrical isolation according
to IEC 60950-1 / EN 60950-1 / VDE 0805-1.
The following applies for use in North America: The
equipment power supply must comply with NEC Class 2
according to the National Electrical Code (ANSI/NFPA 70).
The supply terminals and the process and communication
signals, including Ethernet, may only be connected to
safety extra low voltage (SELV) with safe electrical
isolation according to Class 2 Power Supply in North
America.
Legal information
NOTICE
The device is subject to licensing regulations and specific
operating conditions. Please observe the information
underhttp://www.siemens.com/gamma-td (search text
"LOGO").
Status of the CMK2000
P1
LED
KNX
LED
Description
x x
Error: Version conflict between
firmware components
x
Device defective
x x Communication error or LOGO! in
STOP operating state
x x Maintenance status: Firmware update
in progress
x x
Incomplete configuration or
programming mode active
x x Error-free operating mode
Connection status with LOGO!
RUN
LED
P1
LED
KNX
LED
Description
x
x LAN link established and LAN
communication active
x
x LAN link established
x
x No LAN link established
KNX connection status / programming mode / warm restart
RUN
LED
P1
LED
KNX
LED
Description
x x
No KNX bus connected
x x
KNX bus connected
x x
Programming mode active
x x
Incomplete configuration
Meaning of the LED symbols
Symbol
Description
LED is off
LED is permanently lit red, orange or green
LED flashes in a single color (red, orange or
green)
LED flashes in two colors (orange/green)
x
LED state is irrelevant
Selecting the installation location / mounting position
The device is to be installed on a DIN rail or mounted on a
wall.
Permitted mounting positions: horizontal or vertical
Ensure that the permissible ambient temperature range
is not exceeded:
Horizontal installation: 0 °C to 55 °C
Vertical installation 0 °C to 45 °C
Ensure that no condensation can form at a relative
atmospheric humidity of between 10% and 95%.
Ensure an air pressure of between 795 hPa and 1080
hPa.
Maintain a minimum clearance distance of at least 35
mm above and below. Provide sufficient space for
supply voltage, Ethernet and the KNX bus connection.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Logo CMK2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Logo CMK2000 in the language / languages: English, German, French, Italian, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info