788816
14
Zoom out
Zoom in
Previous page
1/16
Next page
en Installation instructions
14
3. Connect the enclosed power cord to the appliance
and secure the stain relief.
4. Screw the two angle brackets to the appliance. Note
the position of the screws. Screw in the screws until
8mm of the threaded section is still protruding.
Installing the appliance
1. Use the angle brackets to hang the appliance on
the screws, align it and tighten it.
2. Appliance width 90cm: Pull the filter pull-out out
completely towards the front. Also use two screws
each on the left and right to screw the appliance to
the side upper cabinets from below.
3. Adjust the wall closing strip to the clearance
between the appliance and the wall.
4. Snap the wall closing strip into the holders.
5. Fit the grease filters.
6. Establish the pipe connection.
7. Establish the electrical connection.
Note:
You can conceal the housing of the extractor hood
within the upper cabinet. In doing so, observe the
following:
¡The intermediate floor must not rest on the housing.
¡The front panel must not be secured to the housing.
¡Access to the housing must remain possible in or-
der to change the filter and for after-sales service.
Changing the filter pull-out's limit stop
On some versions of the appliance, the limit stop for
the filter pull-out can be changed. Spacers are included
with these appliances in order to set the appliance's
handle strip so that it is flush with the fitted unit.
1. Pull the filter pull-out towards the front.
2. Shorten the spacers to the required dimension and
insert them into the slot specified.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens LI94MA531B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LI94MA531B in the language / languages: English as an attachment in your email.

The manual is 8.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens LI94MA531B

Siemens LI94MA531B User Manual - German - 16 pages

Siemens LI94MA531B User Manual - Dutch - 16 pages

Siemens LI94MA531B User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info