Manual Siemens LI 44930 (page 26 of 96) (English, German, Dutch, French, Italian, Portuguese, Spanish)

109351

Zoom out

Zoom in

1/96

3. Screw in the adjusting screws by hand

until the extractor hood is situated on

the base of the cupboard.

7. Feed the mains connection cable out of

the cupboard.

8. Connect the pipes in the wall cupboard.

– If required, attach the air hose to the

cupboard ceiling –.

9. Re-insert grease ﬁlter

(see Operating instructions).

Fitting into wall cupboard

ṇ Check door alignment and readjust if

necessary.

1. Remove grease ﬁlter

(see Operating instructions).

2. Lift the extractor hood into the cupboard

from below until both ﬁxing lugs have

locked ﬁrmly into position.

❑

Align the extractor hood in the

cupboard.

❑

Carefully tighten both fastening screws.

4. Also attach the extractor hood to the left

and right wall cupboards with 2 screws

each side. First make pilot holes with a

bradawl.

5. Seal the holes with 2 stoppers each on

the left and right.

6. If required, shorten the wall cover to the

required dimension (e.g. saw off).

Attach the wall cover with the enclosed

clips.

Screw the wall cover to the wall

cupboard.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens LI 44930 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens LI 44930 Manual

Product: