Manual Siemens lc86950 (page 22 of 124) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

128897

Zoom out

Zoom in

1/124

Electrical connection

WARNING: THIS APPLIANCE MUST BE

EARTHED

IMPORTANT: Fitting a Different Plug:

The wires in the mains lead are coloured in

accordance with the following code:

Green and Yellow – Earth

Blue – Neutral

Brown – Live

If you ﬁt your own plug, the colours of

these wires may not correspond with the

identifying marks on the plug terminals.

This is what you have to do:

1. Connect the green and yellow (Earth)

wire to the terminal in the plug marked

‘E’ or with the symbol ( ), or

coloured green or green and yellow.

2. Connect the blue (Neutral) wire to the

terminal in the plug marked ‘N’ or

coloured black.

3. Connect the brown (Live) wire to the

terminal marked ‘L’, or coloured red.

The extractor hood should only be

connected to an earthed socket that has

been installed according to relevant

regulations.

If possible, site the earthed socket directly

behind the chimney panelling.

Electrical data:

Are to be found on the name plate inside

the appliance after removal of the ﬁlter

frame.

ṇ Before undertaking any repairs,

always disconnect the extractor hood from

the electricity supply.

Length of the connecting cable: 1.30 m.

If it is necessary to wire the extractor

hood directly into the mains:

The extractor hood should only be

connected to the electricity supply by a

properly qualiﬁed electrician.

A separator must be installed in the

household circuit. A suitable separator is a

switch that has a contact gap of more than

3 mm and interrupts all poles. Such

devices include circuit breakers and

contactors.

This extractor hood corresponds to EC

regulations concerning RF interference

suppression.

Installation

This extractor hood is intended to be

mounted onto the kitchen wall.

1. Remove the grease ﬁlter (refer to

Operating Instructions).

2. Protect the worktop by placing the

cardboard packaging on it.

3. Mark a centre line on the wall from the

ceiling to the lower edge of the

extractor hood.

4. Use the template to mark the points on

the wall where the screws will be

mounted. In order to make it easier to

hook the hood onto the screws, draw

the outline of the area where the hood

will be attached.

ṇ Ensure that the minimum distance

between the hob and the extractor hood is

maintained – 550 mm for an electric hob

and 650 mm for a gas hob.

5. Using an 8 mm bit, drill 3 holes for the

extractor hood and 2 holes for the

upper ﬁxing bracket and insert wall

plugs ﬂush with the wall.

412

mind. 550 Elektro

mind. 650 Gas

204

365

412

204

365

216

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens lc86950 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens lc86950 Manual

Product: